The EBP®23 is a ‘brushless’ 12 volt, high flow (23 litres / 6 gallons per minute), magnetically driven water pump. The EBP® motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required. The many EBP® applications include: booster for car heater and LPG systems, solar pump applications, water cooled motorcycle, go-kart engines, turbo air / water intercoolers & household irrigation. 

The EBP®23 is designed to complement your existing Davies, Craig EWP (Electric Water Pump), or belt-driven mechanical water pump, or improve your heater and/or cooling system or assist engine block cooling circulation. The EBP can continually circulate coolant around the engine head, block and by-pass. It has a high flow capacity and has the advantage of running at a speed independent of the engine speed. The EBP® can also be set to continue running with a timer or thermal switch (not supplied) after engine shut down to prevent damaging heat soak.

Kit Includes:

  • Electric Booster Pump EB23
  • Wiring Loom (AMP Plug)
  • Installation Instructions
Operating Voltage 6-18V DC
Maximum Current 1.25 Amps
Motor Type Magnetic Drive Brushless
Max Flow Rate 23L/min (6.1GPM)
Rated Flow Rate @ 10 kPa 17.25L/min (4.6 GPM)
Maximum Head Pressure 0.25 Bar (3.63PSI)
Maximum Head Height 2.5m (8ft 2.4in)
Fluid Temperatures -40°C to 120°C (-40°F to 248°
Body Material Polyphenylene Sulphide (PPS) & Nylon 66
Burst Pressure 250kPa (36PSI)
Inlet & Outlet Push on Barb
Hose Fitment Standard 19mm (3/4")

 

SKU PUDC1223K
Barcode # 9050
Brand Davies Craig
Shipping Weight 0.7400kg
Shipping Width 0.160m
Shipping Height 0.080m
Shipping Length 0.125m
Shipping Cubic 0.001600000m3

Be The First To Review This Product!

Help other The 12 Volt Shop users shop smarter by writing reviews for products you have purchased.

Write a product review