Solar Racking

Alzone Roof Mount Kits

Alzone Ground Mount Kits

Alzone Pole Mount Kits

Alzone Rails

Alzone Feet

Alzone Clamps

Alzone Bolts

Solar Panels

Alzone Roof Mount Frames

Alzone are an Australian owned and Operated company who have specialised in Solar Mounting Systems for over 12 years now.

Alzone supply Australian made Solar Mounting Systems (Solar Racking) and have been supplying them throughout Australia and New Zealand longer than most other racking / mounting system suppliers have even existed.

All of the Alzone products are source within Australia. Rails are manufactured in Australia and components are source from Australian companies.

When Alzone first started supplying mounting systems there were only 5 Solar Panels Manufacturers supplying solar products to Australia, compared to now where there are hundreds maybe even thousands of solar panel manufacturers.

Alzone Solar Panels Mounting systems or Solar racking are supplied with complete Engineer Compliance for AS / NZS Wind Loading Standards (as well as others) and is backed by an UNPARALLELED Industry Leading 20 Year Warranty.

Alzone Solar Panel Mounting Systems are suitable for use in All Wind Zones in Australia. Including Region D Cyclone Areas on the WA Coast. (Cyclone Region D require Cyclone mounting kits)

Alzone have a very versatile product range which covers a wide range of installations such as:

Alzone Cwic Rail Tin, Tile and Tilt Roof Mounting Systems

New from Alzone, an Innovative Rail product which is Versatile, Quick to Install and Durable.

UNPARALLELED INDUSTRY LEADING 20 YEAR WARRANTY

Alzone Cwic Rail is compatible with parallel to roof tin and tile mounting.

This means the Same Rail can be used on Tilt mounts installed on tin roofs via the Telescopic Leg and Mounting Hinges.

This benefits the customer due to reduced inventory and cost outlay due to the versatility or rail usage.

If you already know what you require, scroll down for product listings.

If you are unsure or do not know what you require you can click on the link below, provide the information listed below in blue, and we will provide pricing for a Mounting system to suit your requirements.

CONTACT US FOR COMPLETE ROOF MOUNTED SYSTEM DESIGN

JUST PROVIDE PANEL DIMENSIONS, QUANTITY OF PANELS, ROOF TYPE, AND WHETHER YOU WANT FLAT ON ROOF MOUNTING OR TILT FRAMING (TILT FRAMING NOT AVAILABLE FOR TILED ROOFS)

 

Alzone Cwic Rail has the following Features / Benefits:-

System design is Wind Load Certified by an Experienced and Qualified Australian Structural Engineer for all Australian and New Zealand Wind Regions

Product Warranted against manufacturing fault and corrosion for 20 years (conditions apply)

Australian Compliance Certificate to meet:-

Alzone Bridging Rail Roof Mounting Systems

Alzone's NEW Bridging Rail is a more economical alternative to the old Easy Rail.

This lower profile rail has less extrusions, reducing the amount of hardware required to attach the rail to mounting brackets.

Bridging Rail can be installed in portrait or landscape position on metal or concrete roofing.

The “V” groove on each side of the base allow the roof fixing screws to be aligned with the top of the two adjoining peaks when running rail from gutter to peak on corrugated roofing.

The design of rail bolt shoe allows panel clamp bolts to be installed anywhere along the rail length. A wide centre slot allows roofing fasteners to be installed through the middle of the Bridging Rail if this type of installation is required

Compliance for building peak heights up to 15 Mts.

Compliance for taller structures can be obtained pending suitability of building structure and recommendations by a qualified structural/building engineer.

Dedicated slots on both top sides of rail assist the grounding of panels to rail via the Alzone stainless steel grounding bar.

Fully anodised in Grade 6106 T6 Aluminium.

Rail is useful for spanning areas where the roof understructure is not within an adequate position and for mounting the Alzone Tilt racking via the Alzone Hinge.

Bridging Rail is designed in Australia and Made in Australia by a Quality Assured Manufacturer.

Australian Compliance Certificate to meet:-

Alzone Ground Mount Frames

Alzone Ground Mount Systems are user friendly and quick to install. There are a few different types and configurations to choose from.

All Ground Mounts are offered with Wind Load Compliance for All Australian Wind Zones including Region D D Cyclone mounting.

Short Racks are available to suit a maximum of 2 x 1700mm x 1000mm Panels or a combination of smaller modules which take up the same area.

Short Racks are Engineered to comply with All Wind Zones. The Same frame will mount in Region A as the one which mounts in Region D.

Large Racks are available to suit a Maximum of 4 x 1700mm x 1000mm Panels or a combination of smaller or larger modules (up to 4 x 2100mm x 1000mm panels*) which take up the same area.

Large Racks are are Engineered to comply with All Wind Zones.

For Large Racks, you must specify whether system is for Region A, Region B, Region C or Region D. (if unknown provide location and we can determine wind load requirements)

Alzone Ground Mounts Features:

CONTACT US FOR COMPLETE GROUND MOUNT SYSTEM DESIGN

The Solar Panels will be exposed to a maximum pressure from wind forces equal to:

 

Alzone Pole Mount Kits

The Alzone Pole mount bracket is cast from Aluminium. When combined with Alzone rail it is designed to carry up to two large solar panels (each a maximum of 1700mm x 1000mm) or a series of smaller sized modules.

The Alzone pole mount comes with an internal adaptor tube to suit 2 sizes of pipe, the pipe diameter being determined by the maximum height of the panels as well as the size and number of modules.

The tilt angle can be adjusted from 10 degrees through to 35 degrees.

Stainless steel mounting hardware and anodised (corrosion resistant) aluminium rail is provided when the pole mount is purchased as a pole mount kit (P/No. SPMPMKIT).

Panel clamps and clamp bolts are ordered separately to they suit the number of modules and the size of the solar modules frame.

The pole required to mount these is not included with the kit and can be source from your local metal supply company. It is recommended to use a heavy walled galvanised pipe with either 40NB (48.3mm O.D.) or 50NB (60.3mm O.D.). The 80NB ( 88.90mm O.D.) sized pipe if compliance is required.

The standard pole mount kit uses Alzone Standard Rail and Alzone Eco Rail in combination with other Alzone components.

Alzone Pole Mount Kits (P/No SPMPMKIT1600x850 & P/No SPMPMKIT1700x1000) are Wind Load Certified by an Engineer for use in Australian Wind region A, providing the concrete footing, module installed height and panel dimensions comply. Compliance is available only when system uses the 80NB pole.

Small Panels

P/No. SPMPK540

* End Clamps and Bolts supplied separately due to various panel frame depths. Please provide the depth of frame on the solar panel you will be using so we can ensure correct size clamps and bolts can be provided. (Cost of clamps and bolts included in kit price)

NOTE: NB Pole or Panels are NOT included.

P/No. SPMPK1

* End Clamps and Bolts supplied separately due to various panel frame depths. Please provide the depth of frame on the solar panel you will be using so we can ensure correct size clamps and bolts can be provided. (Cost of clamps and bolts included in kit price)*


NOTE: NB Pole or Panels are NOT included.

* Please specify quantity and size of panels you are mounting when purchasing to ensure correct parts are supplied

POLE MOUNT KIT 1 x 5W-60W $126.97 Buy this product from our online store
POLE MOUNT KIT 1 x 135W $162.69 Buy this product from our online store

NOTE: NB Pole or Panels are NOT included.

Large Panels

P/No. SPMPMKIT1600x850

POLE MOUNT KIT (aluminium) to suit up to 2 x 180W-300W panels with max dimensions up to 1600 x 850mm. Or a series of smaller panels which take up the same square meterage*

Suitable for use with 3 different pipe sizes 40NB, 50NB and 80NB

Kit Features:

KIT includes:

* End Clamps and Bolts supplied separately due to various panel frame depths. Please provide the depth of frame on the solar panel you will be using so we can ensure correct size clamps and bolts can be provided. (Cost of clamps and bolts included in kit price)

NOTE: NB Pole or Panels are NOT included.

P/No. SPMPMKIT1700x1000

POLE MOUNT KIT (aluminium) to suit up to 2 x 180W-300W panels with max dimensions up to 1600 x 850mm. Or a series of smaller panels which take up the same square meterage*

Suitable for use with 3 different pipe sizes 40NB, 50NB and 80NB

Kit Features:

KIT includes:

* End Clamps and Bolts supplied separately due to various panel frame depths. Please provide the depth of frame on the solar panel you will be using so we can ensure correct size clamps and bolts can be provided. (Cost of clamps and bolts included in kit price)

NOTE: NB Pole or Panels are NOT included.

* Please specify quantity and size of panels you are mounting when purchasing to ensure correct parts are supplied

POLE MOUNT KIT 1x1172x660 $156.00 Buy this product from our online store
POLE MOUNT KIT 1x1470x680 $178.99 Buy this product from our online store
POLE MOUNT KIT 1x1600x850 $189.99 Buy this product from our online store
POLE MOUNT KIT 1x1700x1000 $199.37 Buy this product from our online store
POLE MOUNT KIT 2x1470x680 $187.69 Buy this product from our online store
POLE MOUNT KIT 2x1600x850 $215.00 Buy this product from our online store
POLE MOUNT KIT 2x1700x1000 $256.89 Buy this product from our online store

NOTE: NB Pole or Panels are NOT included.

Alzone Rails

Alzone Cwic Rail

Alzone Cwic Rail is a more economic and faster alternative to the Alzone Eco Rail.

Alzone Cwic Rail is compatible with parallel to roof tin and tile mounting.

The Same Rail can be used on Tilt mounts installed on tin roofs via the Telescopic Leg and Mounting Hinges.

This benefits the customer due to reduced inventory and cost outlay due to the versatility or rail usage.

When used in accordance with the Alzone's T.T.E- 360 system., rail can be rotated in any direction to facilitate north facing aspect and is not limited from the edge of roof mounting other than for safety or ease of system maintenance.

Alzone Cwic Rail has the following Features / Benefits:-

Product Warranted against manufacturing fault and corrosion for 20 years (conditions apply)

Australian Compliance Certificate to meet:-

SPMRC2700 CWIC RAIL 2700MM $74.31 Buy this product from our online store
SPMRC3150 CWIC RAIL 3150MM $86.70 Buy this product from our online store
SPMRC3500 CWIC RAIL 3500MM $79.75 Buy this product from our online store
SPMRC4300 CWIC RAIL 4300MM $97.96 Buy this product from our online store
SPMRC5300 CWIC RAIL 5300MM $119.00 Buy this product from our online store

System design is Wind Load Certified by an Experienced and Qualified Australian Structural Engineer for all Australian and New Zealand Wind Regions

Alzone Bridging Rail

Alzone's NEW Bridging Rail is a more economical alternative to the old Easy Rail.

This lower profile rail has less extrusions, reducing the amount of hardware required to attach the rail to mounting brackets.

Bridging Rail can be installed in portrait or landscape position on metal or concrete roofing.

The “V” groove on each side of the base allow the roof fixing screws to be aligned with the top of the two adjoining peaks when running rail from gutter to peak on corrugated roofing.

The design of rail bolt shoe allows panel clamp bolts to be installed anywhere along the rail length. A wide centre slot allows roofing fasteners to be installed through the middle of the Bridging Rail if this type of installation is required

Compliance for building peak heights up to 15 Mts.

Compliance for taller structures can be obtained pending suitability of building structure and recommendations by a qualified structural/building engineer.

Dedicated slots on both top sides of rail assist the grounding of panels to rail via the Alzone stainless steel grounding bar.

Fully anodised in Grade 6106 T6 Aluminium.

Rail is useful for spanning areas where the roof understructure is not within an adequate position and for mounting the Alzone Tilt racking via the Alzone Hinge.

Bridging Rail is designed in Australia and Made in Australia by a Quality Assured Manufacturer.

Australian Compliance Certificate to meet:-

SPMRB3150 BRIDGING RAIL 3150MM $94.18 Buy this product from our online store
SPMRB4300 BRIDGING RAIL 4300MM $128.72 Buy this product from our online store
SPMRB5300 BRIDGING RAIL 5300MM $158.47 Buy this product from our online store

Alzone Easy Rail

Easy-Rail is an economical aluminium solar rail section for mounting solar modules to flat, corrugated or tiled roofs.

There is no need for fitment of additional feet as this is already incorporated in the rail base.

Top slots for the rail bolts and a groove in the foot section to align fastening screws make it easier to install.

Longitudinal slots on top edge provide added grip for securing end clamps.

Convenient lengths are available and these come coated in a durable anodised finish.

Easy Rail is designed in Australia and Made in Australia by a Quality Assured Manufacturer.

Australian Compliance Certificate to meet:-

SPMRA2700 EASY RAIL 2700MM $101.04 Buy this product from our online store
SPMRA2840 EASY RAIL 2840MM $110.37 Buy this product from our online store
SPMRA3150 EASY RAIL 3150MM $122.41 Buy this product from our online store
SPMRA3500 EASY RAIL 3500MM $136.02 Buy this product from our online store
SPMRA4300 EASY RAIL 4300MM $167.10 Buy this product from our online store

System design is Wind Load Certified by an Experienced and Qualified Australian Structural Engineer for all Australian and New Zealand Wind Regions

Alzone Eco Rail

Alzone's new Eco-Rail is a more economical alternative to the standard non-flanged rail.

This lower profile rail has less extrusions, reducing the amount of hardware required to attach the rail to mounting brackets.

The longitudinal grooves on the top of rail ensure exceptional grip for the module securing clamps.

Eco-Rail is compatible with existing Alzone mounting brackets and clamps.

Manufactured from grade T6 aluminium this rail comes in various lengths and is anodised for increased durability.

Eco-Rail systems is suitable for use in all Australian wind regions and approved to meet wind loading, building structure and structural design standards.

When used in accordance with the Alzone's T.T.E- 360 system., rail can be rotated in any direction to facilitate north facing aspect and is not limited from the edge of roof mounting other than for safety or ease of system maintenance.

Eco Rail is designed in Australia and Made in Australia by a Quality Assured Manufacturer.

Australian Compliance Certificate to meet:-

SPMRE2700 ECO RAIL 2700MM $44.50 Buy this product from our online store
SPMRE2840 ECO RAIL 2840MM $42.60 Buy this product from our online store
SPMRE3150 ECO RAIL 3150MM $47.25 Buy this product from our online store
SPMRE3500 ECO RAIL 3500MM $72.50 Buy this product from our online store
SPMRE4300 ECO RAIL 4300MM $79.34 Buy this product from our online store
SPMRE5300 ECO RAIL 5300MM $107.50 Buy this product from our online store
SPMRE5880 ECO RAIL 5880MM $88.20 Buy this product from our online store

System design is Wind Load Certified by an Experienced and Qualified Australian Structural Engineer for all Australian and New Zealand Wind Regions

Alzone Standard Rail

The standard Alzone rail section provides the main support structure for Ground Mounted Systems and used to be used on Roofs until first the Eco Rail and then the Cwic Rail superseded it..

Edge slots on the top and bottom of rail allow for installation of middle and end clamps to the rail via Alzone rail bolts.

Longitudinal slots on top edge provide added grip for securing end clamps to rail.

Various rail lengths are available and all these have two mid slots for convenient mounting of Alzone mounting feet and brackets.

Made from durable aluminium with anodising for increased weather protection these rail systems are engineer certified to comply with Australian standards for wind zones A, B, C & D

Australian Ground Mount Compliance Certificate to meet:-

SPMR3500 STANDARD RAIL 3500MM $93.52 Buy this product from our online store
SPMR4300 STANDARD RAIL 4300MM $114.92 Buy this product from our online store
SPMR5300 STANDARD RAIL 5300MM $141.64 Buy this product from our online store

System design is Wind Load Certified by an Experienced and Qualified Australian Structural Engineer for all Australian and New Zealand Wind Regions

Alzone Leg Rail

The Alzone Leg Rail is used with a SHS section to provide an adjustable rear leg on Cwic Rail Tilt racking systems.

It can also be used as a main rail to mount solar modules, but compliance is not offered in this use.

Slotted top and bottom sections allow use of the standard Alzone stainless clamp bolts and mounting bolts.

Leg Rail is made from Grade 6106 T6 anodised aluminium to improve durability and comes in a standard 3900mm length

It has alignment grooves for ease of drilling along with longitudinal ribs on top for added grip to modules and end clamps.

100% Anodised

 

SPMRL3900 LEG RAIL 3900MM $103.80 Buy this product from our online store

Alzone Mini Easy Rail

This Rail is an alternative to the standard Easy-rail and RV rail.

The lower profile narrower rail allows modules to be mounted at reduced height while still enjoying the convenience of clamping the Solar modules with Alzone mid and end clamps.

The anodised finish and aluminum construction makes it a durable product for use on caravans, marine, motor homes or standard roofing.

It has alignment grooves for ease of drilling along with longitudinal ribs on top for added grip to modules and end clamps.

100% Anodised

 

MINI EASY RAIL 3550MM $95.42 Buy this product from our online store

Alzone Tin Roof Mounting feet

Alzone have a wide range of feet available to suit any installation.

The most common and most sold popular is the Corrugated Foot or Corrugated Mounting Brackets, which conform to the roofs profile so as not to damage/alter shape of the roof.

Klip-lok and Trim-dek feet are also available which straddle the ridge of the Klip-lok or Trim-dek and allow penetration through the top of the ridge.

Corrugated Feet: P/N - SPMFC

Alzone Corrugated Feet have been designed to suit installations on standard large profile corrugated roofs.

The vertical slots in feet uprights provide adjustment to the solar array when roofing is uneven.

When using Alzone Cwic Rail, the Alzone Angle Bracket ( SPMRAFB) can be combined with corrugated feet to change the direction of rail at right angles to corrugations.

The corrugated aluminium foot is finished in durable aluminium anodising for increased weather resistance.

100% Anodised

 

CORRUGATED FOOT $10.08 Buy this product from our online store

Flat Feet: P/N - SPMFF

Alzone Flat Feet have been designed to suit installations on standard large profile corrugated roofs or decking roofs such as Trim-dek or Klip-lok.

The vertical slots in feet uprights provide adjustment to the solar array when roofing is uneven.

When using Alzone Cwic Rail, the Alzone Angle Bracket (SPMRAFB) can be combined with Flat feet to change the direction of rail at right angles to corrugations / ridges.

This Flat aluminium foot is finished in durable aluminium anodising for increased weather resistance.

100% Anodised

 

FLAT FOOT $10.08 Buy this product from our online store

Small Corrugated Mounting Bracket: P/N - SPMFCMBCKT

This low profile Alzone corrugated mounting bracket provides an alternative solution to increase the clearance of modules from roofing.

This Corrugated Mounting Bracket can be used in combination with Alzone Cwic Rail system or with Alzone Eco Rail system.

When used in raised systems the foot allows the raised array to be rotated to face north.

The foot is manufactured from grade 6106 T6 aluminium and finished in a clear anodised for superior weather resistance.

A choice of six pre drilled holes are provided to make installation more convenient.

Alzone isolation pad (SPMFPAD) is recommended as a gasket and isolator for use with this product.

Dimension W 110 mm x L 110 mm x H 52 mm

100% Anodised

SMALL CORRUGATED MOUNTING BCKT $10.08 Buy this product from our online store

Large Corrugated Mounting Bracket: P/N - SPMFLMC

This taller profile Alzone corrugated mounting bracket provides an alternative solution to increase the clearance of modules from roofing. This also reduces module loss of performance from heat transfer off roof sheeting.

Additionally it provides added clearance from accumulation of leaf debris.

This larger corrugated foot can be used in combination with Alzone Eco-Rail TTE360 system or with Alzone Standard rail using angle brackets.

When used in raised systems the foot allows the raised array to be rotated to face north.

The foot is manufactured from grade 6106 T6 aluminium and finished in a clear anodised for superior weather resistance.

A choice of six pre drilled holes are provided to make installation more convenient.

Alzone isolation pad (SPMFPAD) is recommended as a gasket and isolator for use with this product.

Dimension W 110 mm x L 110 mm x H 52 mm

LARGE CORRUGATED MOUNTING BCKT $10.08 Buy this product from our online store

Trim-dek Mounting Brackets: P/N - SPMFTDMBCKT

The Alzone Trim-dek Mounting bracket was designed to mount over the raised peak of Trim-dek Sheeting.

The foot allows attachment of single modules or multiples using Alzone Rail.

Fixing is via a SPMCLAMP with single nut and washer allows for rotation of rail at 360 degrees.

This foot can also be utilised as a mount on flat profile sheeting.

Alzone Isolation Pad SPMFPAD or SPMT3504-18 Foam Tape can be used to provide a gasket and isolation between different metal surfaces.

Clear anodising on this aluminium bracket provides weather resistance and matches finish on Alzone Rail.

100% Anodised

LARGE TRIM-DEK MOUNTING BCKT $10.08 Buy this product from our online store

Trim-dek Foot: P/N - SPMFTD

Alzone Trim-dek Feet have been designed to fit over the raised section of Trim-dek sheeting.

Vertical slots in the foot upright provides adjustment of rail height as well as provision to use a variety of Alzone brackets to change direction of rail or for attachment of tilted system.

The Trim-dek foot can be fastened though peak of sheeting or in valley if required.

Finish on foot is clear anodised aluminium to increase durability during exposure to climate.

Alzone Isolation Pad (SPMFPAD) or Isolation tape (SPMT3504-18) is recommended to provide a gasket and isolation between different metal surfaces.

100% Anodised

TRIM-DEK FOOT $10.08 Buy this product from our online store

Klip-lok Foot : P/N - SPMFKL

The Alzone Klip-lok foot was designed to mount over the ridges of various Klip-lok roof profiles.

Attachment is via roofing screws through the peak. Additional provision for screw attachment has been made on the support feet which sit in the valley (these can be used in difficult installations).

Slotted uprights allows solar module main rails to be mounted following the peaks or with addition of Alzone brackets, run at right angles to peaks.

Product is adaptable for raised (tilted) systems using Alzone brackets and legs.

Manufactured using Grade 6106 T6 aluminium and produced in a clear anodised finish the Klip-lok foot foot provides a durable weather resistant solution on this type of sheeting.

Alzone Isolation Pad (SPMFPAD) or Isolation tape (SPMT3504-18) is recommended to provide a gasket and isolation between different metal surfaces.

100% Anodised

KLIP-LOK FOOT $13.79 Buy this product from our online store

"L" Foot MK2 75x40x55: P/N SPMFLBCKTMK2

The SPMFLBCKTMK2 is an adjustable L-foot component made for the Alzone Cwic Rail Mounting System.

Made of extruded aluminium, these L-feet are strong enough for both residential and commercial solar PV module installations.

The vertical slots make it easy to level the PV array when there are irregularities in the roof.

Dimensions: W 55mm x L 40mm x H 75mm x 8mm Thick

 

100% Anodised

 

L FOOT 70x40x55 MK2 $5.15 Buy this product from our online store

"L" Foot 75x40x55: P/N SPMFLBRACKET

The SPMFLBRACKET is an adjustable L-foot component made for the Alzone Eco rail Mounting System.

Made of extruded aluminium, these L-feet are strong enough for both residential and commercial solar PV module installations.

The vertical slots make it easy to level the PV array when there are irregularities in the roof.

Dimensions: W 40mm x L 40mm x H 75mm x 6mm Thick

100% Anodised

 

SPMFLBRACKET L FOOT 75x40x40 $3.43 Buy this product from our online store

Mounting Hinge: SPMHINGE1

The Alzone Hinge is a mounting hinge that can be modified providing a strong method of attachment of Alzone Rail to various mounting brackets.

The Hinge is primarily used in Tilt frame Racking

The aluminium hinge is finished in clear anodising for ultimate durability.

The securing bolt is corrosion resistant stainless steel.

The installer can easily alter the leg position on hinge by removing bolt and spacers prior to reassembly.

This feature is particularly valuable when doing tilted systems as it allows for various angles.

Hinge can also be used for direct attachment to roof or framing structures

 

ADJUSTABLE MOUNTING HINGE $15.50 Buy this product from our online store

Alzone Tiled Roof Mounting Feet

Alzone Cwic Rail Tile Kit 1 - P/N SPMTKCWIC1

The Alzone Cwic Rail Tile Kit 1 is a Stainless Steel Stirrup (SPMTFBSTIRRUP) with an attached Anodised Aluminium Angle Bracket (SPMLRAB100) and rail clamp (SPMCLAMP) to secure rail to top of Angle Bracket. (SPMLRAB100)

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the slots on the stainless steel stirrup. (SPMTFBSTIRRUP)

Designed for systems where panels are in portrait and rails are parallel to gutter.

The durable grade 304 stainless steel stirrup can be used to mount Alzone Cwic Rail Solar Racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.
Comes with Grade 304 stainless steel bolts.

TILE KIT 1 FOR CWIC RAIL $25.60 Buy this product from our online store

Alzone Cwic Rail Tile Kit 2 - P/N SPMTKCWIC2

The Alzone Cwic Rail Tile Kit 2 is an Anodised Aluminium Plate (SPMTSXB) with an attached Stainless Steel Stirrup, (SPMTFBSTIRRUP) Aluminium Angle Bracket (SPMLRAB100) and Rail Clamp (SPMCLAMP) to secure rail to top of Angle Bracket. (SPMLRAB100)

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the pre-drilled holes on the Anodised Aluminium Plate. (SPMTSXB)

Designed for systems where panels are in portrait and rails are parallel to gutter.

The durable grade 304 stainless steel stirrup can be used to mount Alzone Cwic Rail Solar Racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.
Comes with Grade 304 stainless steel bolts.

TILE KIT 2 FOR CWIC RAIL $32.50 Buy this product from our online store

Alzone Cwic Rail Tile Kit 3 - P/N SPMTKCWIC3

The Alzone Cwic Rail Tile Kit 3 is an Anodised Angle Bracket (SPMRAFB) with an attached Stainless Steel Stirrup (SPMTFBSTIRRUP), Aluminium Angle Bracket (SPMLRAB100) and Rail Clamp (SPMCLAMP) to secure rail to top of Angle Bracket. (SPMLRAB100)

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the pre-drilled holes on the Anodised Aluminium Angle Bracket. (SPMRAFB)

Designed for systems where panels are in portrait and rails are parallel to gutter.

The durable grade 304 stainless steel stirrup can be used to mount Alzone Cwic Rail Solar Racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.
Comes with Grade 304 stainless steel bolts.

TILE KIT 3 FOR CWIC RAIL $32.50 Buy this product from our online store

Alzone Cwic Rail Tile Kit 4 - P/N SPMTKCWIC4

The Alzone Cwic Rail Tile Kit 4 is an Anodised Angle Bracket (SPMLRAB100) with an attached Stainless Steel Stirrup (SPMTFBSTIRRUP), Aluminium Angle Bracket (SPMLRAB100) and Rail Clamp (SPMCLAMP) to secure rail to top of Angle Bracket. (SPMLRAB100)

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the pre-drilled holes on the Anodised Aluminium Angle Bracket. (SPMLRAB100)

Designed for systems where panels are in portrait and rails are parallel to gutter.

The durable grade 304 stainless steel stirrup can be used to mount Alzone Cwic Rail Solar Racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.
Comes with Grade 304 stainless steel bolts.

TILE KIT 4 FOR CWIC RAIL $32.50 Buy this product from our online store

Alzone Cwic Rail Tile Kit 5 - P/N SPMTKCWIC5

The Alzone Cwic Rail Tile Kit 5 is an Anodised Aluminium Plate (SPMTSXB) with an attached Stainless Steel Stirrup (SPMTFBSTIRRUP), Aluminium Angle Bracket (SPMRAFB) and Cwic Rail Socket Head Cap Screws (SPMSHCS8X16 + SPMW8X24 + SPMCRC) to secure rail to Angle Bracket. (SPMRAFB)

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the pre-drilled holes on the Anodised Aluminium Plate. (SPMTSXB)

Designed for systems where panels are in landscape and rails are running up the roof from gutter to roof ridge.

The durable grade 304 stainless steel stirrup can be used to mount Alzone Cwic Rail Solar Racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.
Comes with Grade 304 stainless steel bolts.

TILE KIT 5 FOR CWIC RAIL $32.50 Buy this product from our online store

Alzone Cwic Rail Tile Kit 6 - P/N SPMTKCWIC6

The Alzone Cwic Rail Tile Kit 6 is an Anodised Angle Bracket (SPMRAFB) with an attached Aluminium Plate (SPMTSXB) Stainless Steel Stirrup (SPMTFBSTIRRUP), Aluminium Angle Bracket (SPMLRAFB) and Cwic Rail Socket Head Cap Screws (SPMSHCS8X16 + SPMW8X24 + SPMCRC) to secure rail to Angle Bracket. (SPMRAFB)

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the pre-drilled holes on the Anodised Aluminium Angle Bracket. (SPMRAFB)

Designed for systems where panels are in landscape and rails are running up the roof from gutter to roof ridge.

The durable grade 304 stainless steel stirrup can be used to mount Alzone Cwic Rail Solar Racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.
Comes with Grade 304 stainless steel bolts.

TILE KIT 6 FOR CWIC RAIL $39.55 Buy this product from our online store

Alzone Cwic Rail Tile Kit 7 - P/N SPMTKCWIC7

The Alzone Cwic Rail Tile Kit 7 is an Anodised Angle Bracket (SPMLRAB100) with an attached Aluminium Plate (SPMTSXB) Stainless Steel Stirrup (SPMTFBSTIRRUP), Aluminium Angle Bracket (SPMLRAFB) and Cwic Rail Socket Head Cap Screws (SPMSHCS8X16 + SPMW8X24 + SPMCRC) to secure rail to Angle Bracket. (SPMLRAB100)

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the pre-drilled holes on the Anodised Aluminium Angle Bracket. (SPMLRAB100)

Designed for systems where panels are in landscape and rails are running up the roof from gutter to roof ridge.

The durable grade 304 stainless steel stirrup can be used to mount Alzone Cwic Rail Solar Racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.
Comes with Grade 304 stainless steel bolts.

TILE KIT 7 FOR CWIC RAIL $39.55 Buy this product from our online store

Alzone Cwic Rail Tile Kit 8 - P/N SPMTKCWIC8

The Alzone Cwic Rail Tile Kit 8 is an Anodised Angle Bracket (SPMRAFB) with an attached Aluminium Plate (SPMTSXB) Stainless Steel Stirrup (SPMTFBSTIRRUP), Aluminium Angle Bracket (SPMLRAFB) and Rail Clamp (SPMCLAMP) to secure rail to top of Angle Bracket. (SPMLRAB100)

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the pre-drilled holes on the Anodised Aluminium Angle Bracket. (SPMRAFB)

Designed for systems where panels are in portrait and rails are parallel to gutter.

The durable grade 304 stainless steel stirrup can be used to mount Alzone Cwic Rail Solar Racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.
Comes with Grade 304 stainless steel bolts.

TILE KIT 8 FOR CWIC RAIL $39.55 Buy this product from our online store

Alzone Cwic Rail Tile Kit 9 - P/N SPMTKCWIC9

The Alzone Cwic Rail Tile Kit 9 is an Anodised Angle Bracket (SPMLRAB100) with an attached Aluminium Plate (SPMTSXB) Stainless Steel Stirrup (SPMTFBSTIRRUP), Aluminium Angle Bracket (SPMLRAFB) and Rail Clamp (SPMCLAMP) to secure rail to top of Angle Bracket. (SPMLRAB100)

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the pre-drilled holes on the Anodised Aluminium Angle Bracket. (SPMLRAB100)

Designed for systems where panels are in portrait and rails are parallel to gutter.

The durable grade 304 stainless steel stirrup can be used to mount Alzone Cwic Rail Solar Racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.
Comes with Grade 304 stainless steel bolts.

TILE KIT 9 FOR CWIC RAIL $39.55 Buy this product from our online store

Alzone Eco Rail Tile Kit 1: P/N SPMTILEKIT1

The Alzone Tile kit 1 is a an anodised aluminium plate with an attached stainless steel stirrup.

Mounting the solar racking tile bracket to the top of the roof rafter can be made via the various slots on the anodised aluminium mounting plate, which facilitates horizontal mounting.

The durable grade 304 stainless steel stirrup can be used to mount Alzone non-flanged solar racking.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.

Comes with Grade 304 stainless steel bolts.

 

TILE MOUNTING KIT OPTION 1 $25.60 Buy this product from our online store

Alzone Eco Rail Tile Kit 1: P/N SPMTILEKIT2

The Alzone Tile kit 2 is a an anodised aluminium angle bracket with an attached stainless steel stirrup.

This gives you the option of mounting to the side of the rafter.

Consisting of an anodised aluminium rafter angle bracket, which mounts to the side of the rafter and a stainless steel stirrup.

With a variety of different tiles it allows height adjustment of the stirrup, along with a stronger mount to the rafter.

The slotted upright allows adjustment for variation in roof conformity. The incorporated rail stirrup is designed to fit between the lower and upper tile.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.

Comes with Grade 304 stainless steel bolts.

 

TILE MOUNTING KIT OPTION 2 $25.60 Buy this product from our online store

Alzone Eco Rail Tile Kit 1: P/N SPMTILEKIT3

The Alzone Tile kit 3 is a an anodised aluminium plate with an attached angle bracket and stainless steel stirrup.

This gives you the option of mounting either to the top or the side of the rafter.

Alternatively should you have some difficult tile spacing's, you can use the rafter angle bracket to mount to either side of the rafter and the extension plate to give you the ability to make adjustments either left or right.

NOTE: Some grinding on tiles may be required to minimize the gap between upper and lower tiles.

Comes with Grade 304 stainless steel bolts.

 

 

TILE MOUNTING KIT OPTION 3 $32.20 Buy this product from our online store

Alzone Solar Panel Mid & End Clamps

Alzone End Clamps - Suits Standard Rail, Eco Rail, Easy Rail, Leg Rail

The Alzone end clamps are designed to securely mount solar modules at both ends of Alzone rail sections .

There are a number of sizes available to suit most solar modules.

End clamps are pre drilled with grooves on the underside of clamps for advanced grip.

There is no drilling and clamps can be finger tightened on initial installation reducing risk to your valuable modules.

Clamps are manufactured from aluminium and come complete with a weather resistant anodized finish.

100% ANODISED

SOLAR PANEL END CLAMP 25MM $2.62 Buy this product from our online store
SOLAR PANEL END CLAMP 32MM $2.62 Buy this product from our online store
SOLAR PANEL END CLAMP 34MM $2.62 Buy this product from our online store
SOLAR PANEL END CLAMP 36MM $2.62 Buy this product from our online store
SOLAR PANEL END CLAMP 39MM $2.62 Buy this product from our online store
SOLAR PANEL END CLAMP 42MM $2.62 Buy this product from our online store
SOLAR PANEL END CLAMP 46MM $2.62 Buy this product from our online store
SOLAR PANEL END CLAMP 50MM $2.62 Buy this product from our online store
SOLAR PANEL END CLAMP 57MM $2.62 Buy this product from our online store

Alzone Mid Clamps - Suits Standard Rail, Eco Rail, Easy Rail, Leg Rail

The Alzone end clamps are designed to securely mount solar modules at both ends of Alzone rail sections .

There are a number of sizes available to suit most solar modules.

End clamps are pre drilled with grooves on the underside of clamps for advanced grip.

There is no drilling and clamps can be finger tightened on initial installation reducing risk to your valuable modules.

Clamps are manufactured from aluminium and come complete with a weather resistant anodized finish.

100% ANODISED

SOLAR PANEL MID CLAMP $2.62 Buy this product from our online store

Alzone End Clamps

The Alzone end clamps are designed to securely mount solar modules at both ends of Alzone rail sections .

There are a number of sizes available to suit most solar modules.

End clamps are pre drilled with grooves on the underside of clamps for advanced grip.

There is no drilling and clamps can be finger tightened on initial installation reducing risk to your valuable modules.

Clamps are manufactured from aluminium and come complete with a weather resistant anodized finish.

 

SPMEC-25 25MM END CLAMP KIT $5.64 Buy this product from our online store
SPMEC-32 32MM END CLAMP KIT $5.64 Buy this product from our online store
SPMEC-34 34MM END CLAMP KIT $5.64 Buy this product from our online store
SPMEC-36 36MM END CLAMP KIT $5.64 Buy this product from our online store
SPMEC-39 39MM END CLAMP KIT $5.64 Buy this product from our online store
SPMEC-46 46MM END CLAMP KIT $5.64 Buy this product from our online store
SPMEC-50 50MM END CLAMP KIT $5.64 Buy this product from our online store

Alzone Mid Clamps

The Alzone end clamps are designed to securely mount solar modules at both ends of Alzone rail sections .

There are a number of sizes available to suit most solar modules.

End clamps are pre drilled with grooves on the underside of clamps for advanced grip.

There is no drilling and clamps can be finger tightened on initial installation reducing risk to your valuable modules.

Clamps are manufactured from aluminium and come complete with a weather resistant anodized finish.

 

MIDCLAMPKIT-SUITS 25MM ENDS $5.64 Buy this product from our online store
MIDCLAMPKIT-SUITS 32MM ENDS $5.64 Buy this product from our online store
MIDCLAMPKIT-SUITS 32-39MM ENDS $5.64 Buy this product from our online store
MIDCLAMPKIT-SUITS 42-46MM ENDS $5.64 Buy this product from our online store
MIDCLAMPKIT-SUITS 50-57MM ENDS $5.64 Buy this product from our online store

Alzone Solar Panel Bolts

Alzone Bolts

SPMB racking bolts are manufactured from quality grade 304 stainless steel.Each bolt comes complete with a nut and flat washer with spares available on request.

The head of the 3/8 bolt is designed to fit into channels of all the Alzone racking ensuring ease of connection to feet and other Alzone brackets.

The larger M12 x 50mm bolt is supplied complete with nut and flat washer and is mostly used as a through bolt for Alzone ground mount systems.

M6 x 50mm and M6 x 60mm are used for solar clamp brackets in combination with a specially designed rail shoe which fits into the Alzone rail channel.

Alzone rail bolts are a convenient way to attach middle and end clamps to Standard and Easy-Rail.

The durable stainless steel rail bolts provide ease of installation of solar modules via the special stainless steel rail shoe and serrated securing nut.

 

Alzone Solar Panel Rail & Foot Bolts
SPMB3825 3/8x25MM BOL+NUT+WASH $1.75 Buy this product from our online store
SPMB3845 3/8x45MM BOL+NUT+WASH $2.67 Buy this product from our online store
Alzone Solar Panel Clamp Bolts
END/MID CLAMP BOLT 50MM $2.22 Buy this product from our online store
END/MID CLAMP BOLT 60MM $2.22 Buy this product from our online store
Alzone Ground Mount Bolts
SPMB1250 M12x50MM BOL+NUT+WASH $2.02 Buy this product from our online store
SPMB1265 M12x65MM BOL+NUT+WASH $2.51 Buy this product from our online store