Caravan & Marine Freshwater General Purpose & Washdown Pumps

 

Honda Water Pumps

Why Choose a Honda Pump?

Powerful Honda 4-stroke engines
It all starts with the legendary Honda 4-stroke engine. Because let's face it, that's the heart of any pump. Durable Honda GX series commercial grade engines are easy starting and provide ample power for the toughest conditions.

Honda engines have long been recognized by the construction and rental industries as the leader in providing reliable, quiet, fuel-efficient power. And of course, our pumps are no exception.

Outstanding performance
Honda pumps don't skimp on the features you need to achieve superior performance. From durable silicon carbide seals to cast iron impellers and rigid mounted volutes, our pumps are designed to provide unsurpassed performance and durability in a variety of applications.

Unmatched quality and reliability
You want a pump that's going to be reliable, day in and day out. And with Honda, that's exactly what you get. Honda has a well-deserved reputation for reliability. Our pumps are designed to keep on going, year after year.

3 year warranty on most models
Need more assurance that Honda pumps don't quit? How about a 3 year warranty for residential, commercial, and rental use?

Honda WX10 Emergency Bilge Water Pump Kit

The powerful WX10 is an economical 1" volume pump with a 36m head that delivers a maximum of 140 litres per minute.

• LIGHTWEIGHT & POWERFUL
  • A portable and versatile pump, the WX10 is able to handle large volumes of clean water, making it ideal for irrigation, drainage, general purpose cleaning and many other applications.
  • It's powered by Honda's Generation II mini 4-Stroke GX25 engine, a leader of its class and the same engine that powers many of Honda's handheld products.
  • Featuring an economical 1" volume pump, a maximum suction head of 8m and a total head of 36m, it delivers up to 140 litres of water per minute.
• EASY & FRIENDLY
  • Like most Honda Power Equipment products, the WX10 starts first time, every time with Honda's famous one pull easy start system.
  • Being powered by a long-lasting, efficient Honda engine, you'll never have to mix oil and petrol again.
  • That makes the WX10 an environmentally-friendly Volume Pump with low emissions, less noise than the competition and low fuel consumption.
• HONDA PUMP RANGE
  • Honda Water Pumps offer a level of uncompromising performance to a wide variety of water transfer applications.
  • Designed for easy starting, priming and dependable service, used throughout the world for over 20 years, Honda water pumps have earned a reputation for unsurpassed reliability and performance.
  • These pumps are known for their durable construction, quality engines and easy portability; features that apply to all categories of Honda pumps.
• WARRANTY
  • All Honda pumps come with an impressive 4 Year Domestic Warranty and 1 Year Commercial Warranty, giving you added peace of mind.

When combined with a network of over 450 authorised independent dealers around Australia, you've got some serious back-up with a Honda pump.

There's no question; if you're after a quality investment that won't let you down, the Honda WX10 is just the pump for you.

ENGINE	GX25	DISCHARGE PORT DIAMETER	25mm
DISPLACEMENT (CC)	25cc	MAXIMUM PUMPING CAPACITY	140 l/min
FUEL TYPE	Unleaded	SELF PRIMING TIME (AT 5m)	80 sec at 5m
FUEL TANK CAPACITY	0.55 litres	PUMP TYPE	Centrifugal volume pump
FUEL CONSUMPTION	0.54 l/hr	OIL ALERT	No
TOTAL HEAD	36m	DIMENSIONS	325 x 220 x 300
SUCTION HEAD	8m	DRY WEIGHT (KG)	6.1
MAXIMUM PUMPING CAPACITY	140 litres	MOUNTING TYPE	No
SUCTION PORT DIAMETER	25mm	HOSE BAND/STAINER	Yes

Your Choice of 5m, 10m 15m or 20m Lenght of hose for Suction / Discharge*.

Honda WX10 Emergengy Bilge Water Pump Kit
PUHWX10EBK5M	Emerg. Bilge Kit	$715.00
PUHWX10EBK10M
PUHWX10EBK15M	Emerg. Bilge Kit	$745.00
PUHWX10EBK20M

*NOTE: Hose shown in pictureis not the same colour as one supplied. Hose supplied is black.

Honda WX15 Emergency Bilge Water Pump Kit

The powerful WX15 is a compact 1.5" volume pump with a 40m head that delivers a maximum capacity of 240 litres per minute.

• DIVERSE AND ADAPTABLE
  • Portable & versatile, the WX15 is able to handle large volumes of clean water, making it ideal for irrigation, drainage, general purpose cleaning and many other applications.
  • It features an economical 1.5" volume pump, with a maximum suction head of 8m and a maximum total head of 40m.
  • It delivers 240 litres of water per minute, ensuring that however you choose to use it, the WX15 will offer you great pressure at a very reasonable price.
• EASY-STARTING
  • Like most Honda Power Equipment products, the WX15 starts first time, every time with Honda's famous one pull easy start system.
  • It's powered by Honda's gutsy GXH50 4-Stroke OHV engine and runs on unleaded fuel, so you'll never have to mix oil and petrol again.
  • All this makes the WX15 a hassle-free, environmentally-friendly Volume Pump with low emissions, less noise than the competition and low fuel consumption.
• UNCOMPROMISING = HONDA
  • Honda Water Pumps offer a level of uncompromising performance to a wide variety of water transfer applications.
  • Designed for easy starting, priming and dependable service, used throughout the world for over 20 years, Honda water pumps have earned a reputation for unsurpassed reliability and performance.
  • These pumps are known for their durable construction, quality engines and easy portability; features that apply to all categories of Honda pumps.
• WARRANTY
  • All Honda pumps come with an impressive 4 Year Domestic Warranty and 1 Year Commercial Warranty, giving you added peace of mind.

When combined with a network of over 450 authorised independent dealers around Australia, you've got some serious back-up with a Honda pump.

There's no question; if you're after a quality investment that won't let you down, the Honda WX15 is just the pump for you.

ENGINE	GXH50	DISCHARGE PORT DIAMETER	40mm
DISPLACEMENT (CC)	50cc	MAXIMUM PUMPING CAPACITY	240 l/min
FUEL TYPE	Unleaded	SELF PRIMING TIME (AT 5m)	120 sec at 5m
FUEL TANK CAPACITY	1.2 litres	PUMP TYPE	Centrifugal volume pump
FUEL CONSUMPTION	0.91 l/hr	OIL ALERT	Yes
TOTAL HEAD	40m	DIMENSIONS	325 x 275 x 375
SUCTION HEAD	8m	DRY WEIGHT (KG)	10
MAXIMUM PUMPING CAPACITY	240 litres	MOUNTING TYPE	No
SUCTION PORT DIAMETER	40mm	HOSE BAND/STAINER	Yes

Your Choice of 5m, 10m 15m or 20m Lenght of hose for Suction / Discharge*.

Honda WX15 Emergengy Bilge Water Pump Kit
PUHWX15EBK5M
PUHWX15EBK10M
PUHWX15EBK15M	Emerg. Bilge Kit	$975.00
PUHWX15EBK20M

*NOTE: Hose shown in pictureis not the same colour as one supplied. Hose supplied is black.

Shurflo Freshwater Pressure Pumps

Since 1968, SHURFLO® has produced small high performance pumps and fluid handling equipment, systems and accessories for the Recreational Vehicle, Marine, Industrial and Floor care industries. Based in Southern California, SHURFLO® distributes products globally through original equipment manufacturers, a network of established distributors.

SHURFLO® has been manufacturing electric motors for its pumps since 1983. Each year over one million motors are manufactured. The same dedication to quality that has made SHURFLO® the leader in its pump markets has been applied to supplying motors to customers who need a dependable, experienced and innovative supplier.

SHURFLO® routinely deals with agencies around the world and works with TUV and VDE to assure that its products are in compliance with the standards which have earned their CE mark. SHURFLO® has files with UL, CSA, NSF, SK and several others. In 1993, SHURflo was the first pump company in North America to earn ISO-9001 registration.

Shurflo 4009 Freshwater Pumps

SHURflo's New 4009 Series fresh water pump design was created with a unique one piece diaphragm and internal by pass, assuring long life and top performance in all plumbing systems. Designed as the next legendary pump to exceed the expectations of customers, the 4009 series pump is constructed for high flow demand, low noise and no rapid cycling. SHURflo's quality reputation has been built on the reliability and dependability of every pump they build. The 4009 series fresh water pump automatic demand pump is super quite, thermally protected and can run dry without damage.

Features:

• Replaces 2088 Series Pump
• Internal By-Pass will prevent rapid cycling
  
• C-Tick approved
  
• 4 chamber diaphragm pump
  
• Made in the U.S.A.

Specifications:

• 12VDC Permanent Magnet, Intermittent Duty
• Pressure Switch 45PSI Shut Off (12v Pump)
• 5.3A Current Draw - 7A fuse recommended (12v Pump)
• 24VDC Permanent Magnet, Intermittent Duty
• Pressure Switch 30PSI Shut Off (24v Pump)
• 4.5A Current Draw - 5A fuse recommended (24v Pump)
• 11.3L/Min Flow Rate
  
• Thermal Overload, Automatic Restart
  
• Same footprint as 2088 series pump
• Dry prime 1.82m
  
• 1/2"-14 NPSM Male Ports
• 2.3KG (60.9cm x 45.7cm x 27.9cm)

 

 

 

 

Shurflo 4009 12v Freshwater Pump
PUS124009	Shurflo 4009 12 Volt	$155.00
PUS244009	Shurflo 4009 24 Volt	$199.99
Shurflo Inline Filter
PUSFIT	Shurflo Filter Thread	$15.99
Shurflo 0.5 Inch (13mm) Hose Adaptors
PUSSF0.5	1/2" Straight Tail	$6.99
PUSEF0.5	1/2" Elbow Tail	$6.99
Shurflo 0.75 Inch (19mm) Hose Adaptors
PUSSF0.75	3/4" Straight Tail	$6.99
PUSEF0.75	3/4" Elbow Tail	$6.99

 

*Pump not warranted unless used with filter

 

Shurflo Pump Accessories

Shurflo Filters

Clean, clear economical strainers eliminate unnecessary repairs by keeping debris and other particles out of the pump. Screws directly on the pump head. Transparent design shows when it is time to clean the bowl. Easy disassembly, cleaning and reassembly.

Features:

• 50 mesh SS screen
  
• Easy to install to pump head.
  
• Clear, clean plastic construction makes it easy to see when cleaning is needed
  
• Keeps debris out of pump
  
• Easy disassembles for easy cleaning
  

Specifications:

• Name : Twist-On Water Strainer (p/n PUSFIT)
  
• Description: Easy Assembly, Keeps Debris Out of Pump, Transparent, Easy to see when strainer needs cleaning, 50 Mesh Stainless Steel Screen
  
• Port Size : 1/2" [13 mm] Pipe Inlet

 

• Name : Twist-On Water Strainer (p/n 752324008056)
  
• Description: Easy Assembly, Keeps Debris Out of Pump, Transparent, Easy to see when strainer needs cleaning, 50 Mesh Stainless Steel Screen
  
• Port Size : 1/2" [13 mm] Barb Inlet

Shurflo 4009 & 2008 Freshwater Pump Filter
PUSFIT	Shurflo Filter Thread	$15.99
Shurflo Extreme Smart Sensor 5.7 Freshwater Pump Filter
PUSFiE	Strainer Extreme SS 5.7	$49.99

 

Shurflo Hose Connections

These high quality nylon Shurflo hose fittings have a wing nut for easy hand tightening. All have 1/2" female thread to screw straight on to the inlet or outlet ports of Shurflo pumps. They are available with either 12mm (1/2") or 20mm (3/4") hose ends.

These high quality nylon Shurflo hose fittings have a wing nut for easy hand tightening. All have 1/2" female thread to screw straight on to the inlet or outlet ports of Shurflo pumps. They are available with either 12mm (1/2") or 20mm (3/4") hose ends in 90 deg. swiveling elbow type.

 

Shurflo 0.5 Inch (13mm) Hose Adaptors
PUSSF0.5	1/2" Straight Tail	$6.99
PUSEF0.5	1/2" Elbow Tail	$6.99
Shurflo 0.75 Inch (19mm) Hose Adaptors
PUSSF0.75	3/4" Straight Tail	$6.99
PUSEF0.75	3/4" Elbow Tail	$6.99

Jabsco Water Diesel & Oil Transfer Pumps

Jabsco is a worldwide leading manufacture of products for the leisure marine market including water system, engine cooling pumps, searchlights and marine waste systems.

Jabsco also offers industrial pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction.

Jabsco Freshwater Pumps

Jabsco Par-Max 4.0 Deck Washdown Kit

The Par-max 4.0 automatic washdown kit includes a 3 chamber diaphragm pressure pump which supplies a constant saltwater flow with quiet operation.

High pressure 60 psi jet is ideal for removing mud from anchoring hardware and blasting decks and fishing platforms clean with ease.

Additional or different size snap-in port kits are available.

• A 60 psi high pressure cut out
  
• Thermal overload protection. Ignition protected
  
• Self priming to 3 metres (10 ft)
• Sealed Motor
• Corrosion resistant. Suitable for use with salt water
  
• Up to 15 litre (4.0 GPM) per minute flow rate
  
• Diaphram design can run dry for extended periods
  
• Splash resistant coating and sealed pressure switch extend pump life

Connections: - for 13 mm (1/2”) bore hose and for 19 mm (3/4”) bore hose
Dimensions: - 220mm long, 110mm wide, 112mm high
Fuse Size: - 12 amp
Max Pressure: - 4.1bar (60psi)
Output: - 15 litres/minute (3.3 gallons/minute)
Weight: - 2.1(kgs)
Compact 3 chamber pump

Includes pump, 12mm inlet filter, hose trigger nozzle, standard Aust. garden hose connector, USA connector for HoseCoils, 1 x 12mm straight hose barb port, 1 x 12mm 90 degree hose barb port, 1 x snap-in port for direct connection to HoseCoil USA threaded hose.

Jabsco Par-Max 4.0 Deck Washdown Kit
PUJPM4KIT	12V Parmax 60psi 15L	$349.00

Jabsco HotShot Deckwash 6.0

The Jabsco HOTSHOT series of automatic deckwash pumps offer high water flow and very high pressure to blast the deck, cockpit or fishing areas clean with ease.

These robust 5 chamber diaphragm pumps have a sealed pressure switch, a patented injection moulded diaphragm and large heavy duty motor brushes which significantly extends the pump life by up to 50%.

The HOTSHOT comes complete with strainer, plug-in ports and a powerful and accurate adjustable hose nozzle with USA garden hose adaptor connection to connect directly onto coiled Hose-Coil hoses.

 

Features:

• Automatic operation at the squeeze of the trigger gun hoe nozzle provided
  
• High capacity up to 22.7 litres per minute flow
  
• High pressure up to 70 PSI for blasting anchors & fishing areas clean
  
• Suitable for use with salt water
  
• Sealed pressure switch and moulded diaphragm eliminates leak paths
  
• Self priming up to 3 metres
  
• 3 year limited warranty
  
• Improved larger noise dampening rubber feet on the pump base
  
• Larger and more efficient motor brushes for extended life
  
• Large adjustable spray nozzle for powerful and accurate operation
  
• Plug-in port pack of 4 x 20mm (3/4”) hose ports included
  
• Plug-in pump strainer included
  
• Large and powerful hose nozzle with USA garden thread adaptor included
  
• Note: Due to the high volume and high pressure of these Hotshot series pumps - they are NOT designed for direct hose connection to the pump outlet port. The ideal system is to use one of the optional fittings shown for permanently plumbed water supply and easy outlet hose connection.

Other optional extras: Washdown connector fittings to quickly connect the deck wash pump supply and coiled delivery hose. Stainless connector or plastic connectors.

Pump: Hotshot
Pump Type: Diaphram
Volts: 12v
Amps: 17 Amp max
Pressure: 70 PSI
Flow Rate: 22.7Lpm (6 Gal)
Vertical Lift: 3 meters

Jabsco HotShot Deckwash 6.0
PUJHS6KIT	12V 6GPM 70PSI 22.7L	$499.99

Jabsco VFLO 5.0 Freshwater Pump

Powered by the revolutionary DiMOND technology.

JABSCO’s V-FLO variable flow, constant pressure water pumps now feature the revolutionary new DiMOND technology designed to automatically diagnose and monitor all aspects of your pump’s performance to prevent system failure. DiMOND incorporates eight specific modules designed to Monitor, Protect and Prevent – allowing you to evaluate and respond to the problem before the pump or your boat are damaged.

The DiMOND technology automatically runs diagnostics to detect common failures such as run dry, plumbing leaks, over current, under current, low voltage and over voltage. If the diagnostic discovers a problem, the pump will stop, identify the root cause, and provide the data you need to solve the problem.

V-FLO is powered by a new variable speed drive that delivers the exact amount of water flow needed to perform a variety of onboard delivery tasks. Since the pump is constantly monitoring water flow and electrical current, it automatically adjusts itself as needed, ensuring that your systems are operating at peak efficiency.

The Difference Between a Pump and a Pumping System:
If the pump is the heart of your boat’s water system, then Jabsco’s DiMOND technology is the brain. DiMOND technology looks at the water system as a whole and controls the pump accordingly. The underlying philosophy is to monitor the system, protect it from failure, and to prevent any damage.

Monitor: The DiMOND technology continuously monitors system operational status in order to detect common water system problems. Pump failures due to run dry conditions or electrical anomalies are a thing of the past. Plumbing leaks are also a major concern with water systems and the DiMOND technology can detect those as well. With six different diagnostics being monitored, you can be assured your water system is functioning properly.

Protect: When system monitoring detects a problem, DiMOND technology shuts down the pump to safeguard your boat and water system. Diagnostic indicator lights on the on/off switch tell you the source of the problem giving you a head start on trouble shooting and repairing the system.

Prevent: Because problems in the system are recognized quickly, you have time to evaluate and respond before the pump or your boat are damaged. Preventing problems are important, but preventing a critical problem like the complete loss of all potable water can be life saving.

Features:

• 5.0 gallons per minute (19 liters)
• DiMOND technology provides consistent water pressure
• Up to 50% less power consumption
• Learns the boat’s water pressure system to improve pump performance

Specifications:

Pump:

• 12V DC
• 12A Draw (15A max Fuse)
• 40PSI Operating pressure
• 4 Chamber Positive displacement diaphragm design
• Self-Priming up to 10 feet suction lift.
• Pump able to run dry without damage.
• Removable port adapters

Motor:

• Permanent magnet, double ball bearing armature.

Jabsco V-Flow 5.0

Jabsco Dual Sensor-max VSD Freshwater Pump

The Jabsco Dual Sensor Max VSD is designed specifically for water pressure systems in boats and recreational vehicles.

Using state-of-the-art electronic control. Patent pending circuitry reduces power consumption and noise at low flow rates and eliminates the need for a bulky accumulator tank. Pump cycling and water hammer are virtually eliminated.

The Dual Sensor-Max variable speed drive (VSD) system is suitable for larger vessels where water demand may be high at multiple outlets.

It combines a Sensor-Max pump coupled with a Par-Max 4 Pump, complete with filters and plumbing connections fully factory fitted. The dual Sensor-max provides constant water pressure without the need for an accumulator tank - and many other features detailed above in the Sensor-Max. It gives constant flow and even hot water temperature mix.

The dual Sensor-Max provides up to 27 Litres per minute flow and will serve up to 6 outlets simultaneously. When demand exceeds the VSD pumps normal operating range, the Par-Max 4 Pump kicks in to keep the water flowing at optimal pressure.

Features:

• Ultimate freshwater delivery - Just like your Tap or Shower at home
• Unique constant water pressure - No pressure switch
• High flow 4 Chamber diaphragm pump - Self Primes to 3 meters
• Flow up to 17 Litres per minute, 1-5 outlets. Max water temperature 70°C
• Heavy duty ignition and thermal protected motor - Suits both 12v and 24v systems.

Specifications:

• Flow up to 9GPM / 34LPM
• 20 Amps @ 12 Volt
• Serves up to 6 outlets
• Running Pressure 30PSI
• Shut Off 40PSI

Jabsco Dual Sensor-Max VSD

Jabsco Diesel Transfer & Oil Change Pumps

Jabsco Reversible Vane-Puppy Pump

Self priming reversible rotary sliding vane pumps designed for medium duty pumping of diesel fuel and light oils.

Features:

• Ideal for pumping diesel fuel from tanks or drums etc
  
• Rotary vanes are impervious to diesel fuel and oils
  
• 6 GPM - 23 litres per minute capacity at 3 metre head
  
• Self priming to 1 metre (3 Ft) vertical
  
• 6 metre maximum total head
  
• Will transfer a 55 gallon drum of diesel in less than 10 minutes
  
• Motor has a 30 minute duty cycle at 3 metre head
  
• Bronze pump head
  
• Dual 1/2" female & 1" hose connections
  
• Reversible Vane-Puppy Pumps - Has switch on motor to reverse flow - ideal for changing engine oil.
  
• 12 volt 8 amp reversible Vane-Puppy Jabsco

 

Jabsco Reversible Vane-Puppy
PUJOILREV 18680*

Jabsco Puppy General Purpose Pumps

The Jabsco "WATER PUPPY" range of flexible impeller pumps have 12/24 volt DC motors for many applications including bilge pumping, deck wash, shower drain and many other general purpose applications. These pumps have bronze head units, continuously rated motors, have high discharge heads and are self priming. They should NOT be run dry (with the exception of the utility puppies) and the motors should NOT be subject to external water or spray. Bilge debris presents no problem to these robust pumps. Choice of capacities, applications and duties.

Mini Puppy - Compact Low Flow Pumps

• Suitable for oil changing, bilge pumping or general purpose applications
  
• 5.5 litres per minute - 330 litres per hour at 3 metre (10 Ft) head
  
• Self priming up to 1.5 metre (5 Ft) vertical lift
  
• Compact continuously rated low flow pump
  
• Supplied as standard with nitrile impeller for oily bilge water
  
• Ports are dual 3/8" BSP female and barbed to suit 20mm (3/4") I.D hose
  
• 12 volt 5 amp Mini Puppy
  
• 24 volt 3 amp Mini Puppy

 

Jabsco Mini Puppy
12v
24v

Junior Puppy - High Pressure Medium Flow Pumps.

• Suitable for pressure deckwash or high discharge head applications
  
• Good flow with high pressure available simply by restricting hose inlet
  
• 15 litres per minute - 900 litres per hour output at 3 metre (10 FT) head
  
• Self priming up to 1.5 metre (5 Ft) vertical lift
  
• Supplied as standard with nitrile impeller for oily bilge water
  
• Ports are dual 3/8" BSP female and barbed to suit 20mm (3/4") I.D hose
  
• 12 volt 13 amp Junior Puppy
  
• 24 volt 8 amp Junior Puppy

 

Jabsco Junior Puppy
12v
24v

Commercial Duty Water Puppy - High flow, Heavy Duty continuously rated pumps

• Suitable for bilge, deckwash or general purpose use
  
• 30 litres per minute - 1770 litres per hour output at 3 metre (10 FT) head
  
• Self priming up to 2.4 metre (8 Ft) vertical lift
• Continuously rated pump with lip seal
  
• Supplied as standard with nitrile impeller for oily bilge water
  
• Ports are dual 1/2" BSP female and barbed to suit 25mm (1") I.D hose
  
• 12 volt 13 amp Water Puppy 2000
  
• 24 volt 8 amp Water Puppy 2000

 

Jabsco Commercial Duty Water Puppy
12v
24v

Utility Puppy 2000 - High flow, Heavy Duty, Run dry pumps

Specifications similar to the Water Puppy above except the Utility Puppy can be run dry for around 10 minutes after initial use. This allows the bilge to be sucked completely dry. 3/4" female BSP threaded ports. Supplied with nitrile impeller for oily bilge water.

• Can be run dry for approx 10 min's after initial use.
  
• 32 litres per minute - 1920 litres per hour output at 3 metre (10 FT) head
  
• Self priming up to 1.2 metre (4 Ft) vertical lift
• Continuously rated pump with lip seal
  
• Supplied as standard with nitrile impeller for oily bilge water
  
• Ports are dual 3/4" BSP female and barbed to suit 25mm (1") I.D hose
  
• 12 volt 13 amp Utility Puppy 2000
  

 

Jabsco Utility Puppy 2000
12v

Maxi Puppy 3000 - Very High flow, Heavy Duty, continuously rated pumps

• Suitable for bilge, deckwash or general purpose use
• Deckwash - High flow floods decks and fishing cockpit to clear debris
  
• 44 litres per minute - 2640 litres per hour output at 3 metre (10 FT) head
  
• Self priming up to 1.5 metre (5 Ft) vertical lift
• Heavy Duty high flow continuously rated pump
  
• Supplied as standard with nitrile impeller for oily bilge water
• Cannot be run dry
  
• Ports are dual 1/2" BSP female and barbed to suit 25mm (1") I.D hose
  
• 12 volt 18 amp Maxi Puppy 2000
  
• 24 volt 10 amp Maxi Puppy 2000

 

Jabsco Maxi Puppy 3000
12v
24v

Utility Puppy 3000 - Very High flow, Mechanical seal run dry pumps

Very High Flow Mechanical Seal Run-Dry Pumps. Specifications similar to the Maxi Puppy above except the Utility Puppy can be run dry for around 10 minutes after initial use allowing the bilge to be sucked completely dry. It also has a heavy duty mechanical seal for long life. 3/4" female BSP threaded ports. Supplied with nitrile impeller for oily bilge water.

• Heavy duty mechanical seal for long life
• Can be run dry for 10 minutes after initial use
  
• Allows the bilge to be sucked completely dry
  
• 43 litres per minute - 2580 litres per hour at 3 metre head
  
• Self primes 2.4 metre (8 Ft) vertical lift
  
• 12 volt 21 amp Utility Puppy 3000
  
• 24 volt 11 amp Utility Puppy 3000

 

Jabsco Utility Puppy 3000
12v
24v

LVM Water and Diesel Transfer Pumps

LVM are based in Arlesey, Bedfordshire (UK) and specialize in Low Voltage DC power products. Formed in 1973 LVM design, build and distribute "in-house", giving the flexibility to respond quickly to customer demand.

LVM manufactures a range of 12 and 24 volt submersible/inline,inline,self priming and pumping kits suitable to a wide range of applications.

All pumps pump fresh water, sea water and several diesel fuels.

 

LVM Niagara, Amazon & Congo Diesel / Water Submersible & Inline Pumps

The LVM are excellent as a fuel or water transfer pump, a marine bilge pump, or for a domestic holding tank water system. Gator/battery clips on the end of the wires allow quick connections. The Amazon and Congo are continuous use rated pumps, (Niagara only rated for intermit ant use) but should not be run dry for long periods. Should not be left continuously submerged (voids warranty).

They can pump sea water, fresh water or diesel fuel.Not suitable for Petrol / Gasoline!

LVM's Niagara Pump outputs up to 12.7 litres/minute at up to 1bar (2.8 gallons/minute at 14psi)

LVM's Amazon Pump outputs up to 18 litres/minute at up to 1bar (4 gallons/minute at 14psi)

LVM's Congo Pump outputs up to 31.8 litres/minute at up to 1bar (7 gallons/minute at 14psi)

Niagara Specs: (Water Only)

• Cable Length: 1(m)
  
• Connections: 1/2" (12.7mm) and 3/4" (19mm) Hose
  
• Dimensions: 130mm long, 36mm diameter
  
• Maximum Current: 2.8 amps
  
• Output: up to 12.7 litres/minute at up to 1bar (2.8 gallons/minute at 14psi)
  
• Suitable for fresh or salt water
  
• Water transfer, deck shower, or deck wash
  
• Water Systems to 60 º C
  
• Intermittent rating of 20 minutes .Should not be run dry for long periods
  
• Packaged Dimensions: L:19.00 x H:5.00 x W:13.00cm
  
• Actual Weight: 0.20 Kg (Approx. 0.40 Kg packed)

Amazon Specs: (Water / Diesel)

• Cable Length: 4(m)
  
• Connections: 1/2" (12.7mm) Hose
  
• Dimensions: 165mm long, 38mm diameter
  
• Maximum Current: 4.5 amps @ 12v / 2.5 amps @ 24v
  
• Output: up to 18 litres/minute at up to 1bar (4 gallons/minute at 14psi)
  
• Suitable for diesel, fresh and salt water
  
• Quick diesel transfer with no spillage
  
• Water transfer, deck shower, or deck wash
  
• Water Systems to 80 º C
  
• Intermittent rating but should not be run dry for long periods
  
• Packaged Dimensions: L:19.00 x H:5.00 x W:13.00cm
  
• Actual Weight: 0.47 Kg (Approx. 0.67 Kg packed)

Congo Specs: (Water / Diesel)

• Cable Length: 4(m)
  
• Connections: 3/4" (19mm) Hose
  
• Dimensions: 165mm long, 38mm diameter
  
• Maximum Current: 6 amps @ 12v / 3 amps @ 24v
  
• Output: up to 31.8 litres/minute at up to 1bar (7 gallons/minute at 14psi)
  
• Suitable for diesel, fresh and salt water
  
• Quick diesel transfer with no spillage
  
• Water transfer, deck shower, or deck wash
  
• Intermittent rating but should not be run dry for long periods
  
• Packaged Dimensions: L:19.00 x H:5.00 x W:13.00cm
  
• Actual Weight: 0.56 Kg (Approx. 0.81 Kg packed)

 

NOTE: These pumps comes with UK wire colouring - brown = positive, blue = negative.

LVM Niagara Pump
PUN12	Niagara 12v 12.7L/m Pump	$79.99
LVM Amazon Pumps
PUAM12	12V Submersible Pump	$139.99
PUAM24	24V Submersible Pump	$139.99
LVM Congo Pumps
PUCO12	Congo 12V Submersible	$199.99
PUCO24	Congo 24V Submersible	$159.99

 

 

Flojet Compact LF122202 Fresh Water Pump

FLOJET Industrial LF Pumps are designed for a wide range of applications and are constructed from a selection of materials suitable for handling a broad range of chemicals. The LF series of diaphragm pumps are self-priming and can be run dry without harm. They are intended for intermittent duty cycles but can be run continuously for short periods of time. The higher the duty cycle the shorter the expected life of the pump.
Typical pump uses are liquid transfer, spraying, circulation, filtration and dispensing.

Features:

• Duplex Diaphragm Design
• Compact automatic demand pump.
• Sealed pressure switch automatically starts and stops pump when discharge valve is opened and closed.
• Self-priming so pump can be located above supply tank.
• Can run dry for extended periods of time without damage.
• Built-in thermal protector,
• Low amp draw for battery powered applications.
• Soft compliant Santoprene mounting system.

Specifications:

• Pump Design: Reciprocating Diaphragm
• Flow Rate: 1.0GPM (3.8L/min) Nominal @ Open Flow
• Duty Cycle: Intermittent
• Wetted Parts:
  • Housing: Polyproplyene
  • Diaphragm: Santoprene
  • Check Valve: Viton or EPDM
  • Check Valve Spring: 316 Stainless Steel
• Minimum Tip Size: #8 Tip, 0.72" (1.83mm) Diameter
• Port Type: 3/8" (9.5mm) Hose Barb
• Operating Pressure: 25PSI (1.7 Bar) Maximum
• Pressure Switch Setting:
  • 35PSI (2.4 Bar) Off
  • 25PSI (1.7 Bar) On
• Self Priming: Up to 2.5ft (0.76m) vertically
• Liquid Temperature: 110°F (43°C) Maximum
• Motor Type: Permanent Magnet Motor
• Motor Voltage: 12 VDC
• Current: 2.5 Amp nominal @ 25PSI (1.7 Bar)
• Approvals: CE

PUFJC12

Flojet Compact 12V

$135.00

Circulation Pumps

Jabsco Cyclone Circulation Pump

Robust, high flow, quiet running, long life pumps for hot water and heating systems and other circulation applications. This heavy duty centrifugal pump has a stainless steel head and and open, no-clog impeller design to easily handle small debris and high temperatures.

Suitable for fresh or salt water, bilge water and mild chemicals.

Not self priming - install below the liquid source.

3 year limited warranty.

• 29 GPM - 110 litres per minute flow
  
• Long life mechanical seal
  
• Centrifugal design moves liquids quickly and efficiently
  
• 3/4" female BSP female threaded ports
  
• 12 volt 8 amp Cyclone pump
  
• 24 volt 4 amp Cyclone pump

 

Jabsco Cyclone Circulation Pump
PUJCY12V*
PUJCY24V*

Jabsco Magnetic Drive Circulation Pump

A compact, low amp draw centrifugal seal-less pump with magnetically driven impeller, designed primarily as a hot water circulation pump for marine and automotive use and for many other circulation purposes. Magnetically driven impeller allows it to handle small debris with ease and there is no seal to wear out. Pump head handles antifreeze and high temps.

Not self priming - must be installed below the liquid source.

• 4 GPM - 15 litres per minute at 1 metre (3 1/2 Ft) head
  
• Will handle engine antifreeze and high temperatures to 100 deg C
  
• Quiet running no-clog magnetic drive design
  
• Ignition protected continuous duty motor with 2,500 hour brush life
  
• Ports are barbed to suit 20mm (3/4") hose
  
• 12 volt 1.2 amp mag-drive pump
  
• 24 volt 0.7 amp mag-drive pump

 

Jabsco Magnetic Drive Circuation Pump
PUJC12*
PUJC24*

 

Davies Craig Electric Booster Pump

Davies Craig developed the Electric Booster Pump (EBP). Designed for use with either an EWP or a conventional mechanical water pump to enhance the heater and LPG systems.

The 12v Davies Craig Electric Booster Pump (EBP) with its high flow capacity and advanced design, makes it ideal for a range of applications including:

• Circulation Pump for LPG Vehicles - The EBP improves water circulation through the engine block to prevent LPG injector from icing up. Other advantages include a more even engine temperature and better engine cooling.
  
• Heater Booster Pump - The EBP increases heater performance during normal vehicle operation and enables continued heater usage when engine is off (but IGNITION is ON).
  
• Water Pump for Liquid Cooled Motorcycle Engines - The EBP provides liquid circulation independent of the engine speed to provide cooling at all levels. It may be used with the EWP Digital Controller to replace the existing water pump or used with an override switch to compliment the existing system.
  
• Multi-Purpose Pump - The EBP may be used in a number of different applications where flow is required, such as irrigation, camping, solar pumps, go-karts or marine operations.

The EBP23 is a ‘brushless’ 12 volt, high flow (23 litres / 6.08 gallons per minute), magnetically driven water pump. The EBP motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required.

Technical Specifications:

Motor	12V Brushless
Operating Voltage	9V to 15V DC
Max Current Draw	1.3 Amps
Pump Design	Recirculating * Centrifugal
Drive	Magnetic – No seals
Operating Temperature	-40C to +120C (-10F to +248F)
Burst Pressure	250Kpa (36PSI)
Flow Rate	23 L/min (6 gal/min)
Head Pumping Pressure	0.25 Bar 3.62 PSI
Weight	364g (0.8 lbs)
Self Priming	No
Max Head	2.2M

The EBP®23 is designed to complement your existing Davies, Craig EWP (Electric Water Pump), or belt-driven mechanical water pump, or improve your heater and/or cooling system or assist engine block cooling circulation. The EBP can continually circulate coolant around the engine head, block and by-pass. It has a high flow capacity and has the advantage of running at a speed independent of the engine speed. The EBP® can also be set to continue running with a timer or thermal switch (not supplied) after engine shut down to prevent damaging heat soak.

Davies Craig Electric Booster Pump
PUDC1223	Davies Craig Circ 23L	$169.99

 

Whale Pumps

Whale electric freshwater pump range includes models with the very latest electronic technology. All pumps are manufactured from only highest quality inhouse moulded parts and robust motors.

Whale have developed their pump designs based on more than 60 years of expertise. Today they have used that experience to develop their most compact, quiet lightweight high performance electric impeller pumps.

Whale Inline & Submersible Centrifugal Water Pumps

Whale Inline Electric Galley Pumps, Simple pumps designed to fit in line above an electric or manual pump to boost flow rate.

Premium Pump (13.2 lpm / 3.6 amps / 1.0 bar)

• Reliable, general purpose and suitable for multiple outlets
  
• Long life, very quiet with low power consumption
  
• An inexpensive way to update a manual to an electric system.
  

High Flow Pump (15.8 lpm / 3.8 amps / 1.4 Bar)

• Market leading showering submersible pump for flow performance.

Inline Pump:

• Simple, compact and an economical solution
  
• Long life, very quiet with low power consumption
  
• An inexpensive way to enhance your water system
  
• Choose the pump to suit your freshwater needs on board from 2 flow options
  
• lightweight design
  
• Straight forward installation - fits unsupported into pipework
  

Please note: For best performance install the pump in the suction pipe between the foot pump and the water tank, not between the foot pump and tap.

Submersible Pump:

• Maximum continuous operation should not exceed 15 minutes
  
• Do not run pump dry as it will cause pump damage
  
• Do not use to pump water that is over 60°C
  
• We recommend the pump stands vertically in the tank
  
• Before switching on, place the pump in water and shake for a few seconds to release trapped air. This will ensure successful priming and should be repeated after refilling the water tank
  
• Add an in-line pump into a system to boost water flow

Whale Inline Water Pump
Whale Submersible Water Pump

Solar Pond Pumps

Aquarius Solar Submersible Pumps

Compact and low maintenance, these underwater solar pumps will add an attractive fountain or waterfall feature to your garden pond, while running only by the power of the sun. These pumps are extremely efficient compared to other pumps of similar flow rate. The most cost effective of these being the 700 model which will run on only one 11W solar panel (sold separately). The pumps are able to cope with murky water.

Each pump comes with a three year guarantee and replacement parts are available.

Features:

• High performance Aquarius Solar type solar fountain pump.
  
• Special, robust plugs for connecting to the Solarsafe storage and regulating unit, or to one of the new Oase Solar modules.
  
• Supplied with 5m power cable and 3 different nozzle patterns.
• Pump only, no Solar panels or batteries included with this stock item
  
• Rated voltage 12v

 

 

 

 

 

 

Oase Aquarius Solar 700 (formerly Nautilus Solar 70)

• 700 LPH
• 2m max. head

Oase Aquarius Solar 1500 (formerly Nautilus Solar 140)

• 1500 LPH
• 3m max. head

Oase Solar Pond Pumps
PUAQUA700	Aquarius Solar 700	$350.00
PUAQUA1500	Aquarius Solar 1500	$499.99

Bilge Pumps

Attwood Tsunami Bilge Pumps

With their innovative engineering and compact design, Tsunami pumps deliver high output from a small package. We use the advanced material available, including the best quality bearings and state-of-the-art brushes, alloys and magnets. Our patented shaft seal prevents leaks caused by misalignment and out caulked and tinned wiring eliminates wicking, prevents water damage and resists corrosion.

Boaters, boat-builders, and dealers all want one thing from their bilge pumps — more power! And that's what the Tsunami® Series delivers... with high-capacity, high-efficiency output Tsunami Cartridge pumps have replaceable / interchangeable motor cores. Makes servicing simple and quick.

Attwood Tsunami Bilge Pumps
PUBT1200	1200 GPH Bilge Attwoo	$99.50

*Listed GPH is measured at design voltage of 13.6 VDC.

 

Rule Non-Automatic Submersible Bilge Pumps - Round Base

Compact submersible electric pump for use as a bilge or bait pump. Totally submersible pump with water cooled, ignition protected motor, stainless steel shaft and snap-off strainer base. This pump is extemely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space. Available in 12v or 24v. 3 year limited warranty

360GPH Specs:

• Connections: For 19mm (3/4") bore hose.
  
• Dimensions: 90mm high, 60mm base diameter.
  
• Fuse Size: 2.5 amp
  
• Output: Up to 23 litres/minute (5 gallons/minute). Max. recommended discharge head 2m.
  
• Light, compact pump for ski-boats and small vessels.
  
• Tough plastic body with integral strainer.
  
• Quick release inlet strainer allows rapid cleaning.
  
• Low amp draw conserves batteries.
  
• Ignition protected.
  
• For automatic operation use Rule Float Switches.
  
• Packaged Dimensions: L:15.00 x H:8.00 x W:19.00cm
  
• Actual Weight: 0.32 Kg (Approx. 0.52 Kg packed)

500GPH Specs:

• Connections: For 19mm (3/4") bore hose.
  
• Dimensions: 90mm high, 60mm base diameter.
  
• Fuse Size: 2.5 amp
  
• Output: Up to 28 litres/minute (6 gallons/minute). Max. recommended discharge head 2m.
  
• Light, compact pump for ski-boats and small vessels.
  
• Tough plastic body with integral strainer.
  
• Quick release inlet strainer allows rapid cleaning.
  
• Low amp draw conserves batteries.
  
• Motor rated for 1500-hour life.
  
• Ignition protected.
  
• For automatic operation, use Rule Float Switches.
  
• Packaged Dimensions: L:15.00 x H:8.00 x W:19.00cm
  
• Actual Weight: 0.32 Kg (Approx. 0.52 Kg packed)

800GPH Specs:

• Connections: For 19mm (3/4") bore hose.
  
• Dimensions: 95mm high, 60mm base diameter.
  
• Fuse Size: 5 amp
  
• Output: Up to 50 litres/minute (11 gallons/minute). Max. recommended discharge head 2m.
  
• Light, compact pump for ski-boats and small vessels.
  
• Tough plastic body.
  
• Quick release inlet strainer allows rapid cleaning.
  
• Low amp draw conserves batteries.
  
• Ignition protected.
  
• For automatic operation use Rule Float Switches.
  
• Packaged Dimensions: L:15.00 x H:8.00 x W:19.00cm
  
• Actual Weight: 0.38 Kg (Approx. 0.58 Kg packed)

Rule Non-Automatic Submersible Bilge Pumps - Round Base
042237083425
042237083449
042237084385

Rule Non-Automatic Submersible Bilge Pumps - Square Base

High capacity bilge pump in a compact, modular housing with easy installation features. This pump has a stainless steel shaft, long wearing seals, water cooled motor and incorporates an efficient anti-airlock feature. 3 year limited warranty.

Rule 1000 Pump Specs:

• Connections: For 28mm (1 1/8") bore hose.
• Dimensions: 100mm high, 74mm wide.
  
• Fuse Size: 5 amp
• 12 volt DC - 2.9 amp draw
  
• Output: Up to 63 litres/minute (14 gallons/minute). Max. recommended discharge head 2m.
  
• Compact pump for smaller vessels.
  
• Tough plastic body.
  
• Low amp draw conserves batteries.
  
• 36 mounting variations.
  
• Petrol resistant strainer base.
  
• Ignition protected.
  
• For automatic operation use Rule Float Switches.
  
• Packaged Dimensions: L:15.00 x H:11.00 x W:20.00cm
  
• Actual Weight: 0.43 Kg (Approx. 0.63 Kg packed)

Rule Non-Automatic Submersible Bilge Pumps - Square Base
PUBR1000	Rule Bilge 1000GPH	$99.99

Rule Non-Automatic Heavy Duty Submersible Bilge Pumps

Rule 1500 Bilge Pump

High capacity 12v or 24v heavy duty submersible bilge pump, double insulated, dual water/air cooled motor manufactured by Rule specifically for marine use. Ignition protected (will not create a spark) and won't burn out if they run dry. Moisture tight wiring, anti-airlock feature, stainless steel shaft and Rule's exclusive Teflon seals combine to give reliability and high performance. These pumps include a snap-on strainer base for easy cleaning and fitting, stainless steel mounting screws and a clip to secure a float switch to the pump 3 year limited warranty.

• Connections: For 28mm (1 1/8") bore hose.
  
• Dimensions: 153mm high, 100mm base diameter.
  
• Fuse Size: 9 amp
  
• Output: Up to 95 litres/minute (21 gallons/minute). Max. recommended discharge head 2m.
  
• For mid-sized yachts and motor cruisers.
  
• Tough plastic body with integral strainer.
  
• Quick release inlet strainer allows rapid cleaning.
  
• Ignition protected.
  
• For automatic operation use Rule Float Switches.
  
• Packaged Dimensions: L:11.00 x H:16.00 x W:14.00cm
  
• Actual Weight: 1.36 Kg (Approx. 1.86 Kg packed)

Rule 1500 - 12 volt

• 1500 GPH - 94 litres per minute
  
• Size: 152mm H x 108mm W
  
• 12 volt DC - 4.8 amp draw
  
• Suits hose size 28mm (1 1/8")

 

Rule 2000 Bilge Pump

This heavy duty pump is engineered to commercial standards and is the world's largest selling high capacity submersible electric bilge pump. Available in 12v or 24v, it features a double insulated, dual water/air cooled motor which is ignition protected (will not create a spark) and won't burn out if run dry. Moisture tight wiring, anti-airlock feature, stainless steel shaft and Rule's exclusive Teflon seals combine to give reliability and high performance. These pumps include a snap-on strainer base for easy cleaning and fitting, stainless steel mounting screws and a clip to secure a float switch to the pump 3 year limited warranty.

• Connections: For 28mm (1 1/8") bore hose.
  
• Dimensions: 155mm high, 105mm base diameter.
  
• Fuse Size: 15 amp
  
• Output: Up to 120 litres/minute (27 gallons/minute). Max. recommended discharge head 3m.
  
• For mid-sized yachts and motor cruisers.
  
• Tough plastic body with integral strainer.
  
• Quick release inlet strainer allows rapid cleaning.
  
• Motor rated for 2500-hour life.
  
• Ignition protected.
  
• For automatic operation use Rule Float Switches.
  
• Packaged Dimensions: L:11.00 x H:16.00 x W:14.00cm
  
• Actual Weight: 1.43 Kg (Approx. 1.93 Kg packed)

Rule 2000 - 12 volt

• 2000 GPH - 126 litres per minute
  
• Size: 152mm H x 108mm W
  
• 12 volt DC - 8.4 amp draw
  
• Suits hose size 28mm (1 1/8")

Rule Non-Automatic Heavy Duty Submersible Bilge Pumps
PUBR1500	Rule Bilge 1500GPH	$199.99
PUBR2000	Rule Bilge 2000GPH	$299.00

Rule Automatic Submersible Bilge Pumps

Compact submersible electric pump for use as a bilge or bait pump. Totally submersible pump with water cooled, ignition protected motor, stainless steel shaft and snap-off strainer base. This pump is extemely efficient, draws low current and offers high capacity output in a very compact housing, to fit into the smallest available space. Available in 12v or 24v. 3 year limited warrantyRule-Mate fully automatic submersible bilge pumps with Rule's exclusive "Spongeability" feature. New innovative design incorporates the bilge pump and water sensor in a single housing. Unique Rule "Spongeability" feature leaves the bilge the driest ever - when water in the bilge reaches a certain height the sensor automatically activates and the pump runs until water is pumped out, reducing boat weight, saving fuel and minimising bilge odour. Pump check feature - simply touch the pump check button and hold for a few seconds to test cycle the pump. 3 year limited warranty.

Features Include:

• Fully automated sumbersible bilge pump systems
  
• Bilge water sensor and pump in a common housing
  
• No battery drain other than when pump is in use
  
• Removeable strainer and impeller area are accessible to clear debris
  
• Threaded ports for easy installation. Straight and 90 degree included
  
• Pump and switch are internally wired for easy installation
  
• A third wire allows for manual over-ride using Rule switch panel or it can activate an alarm or indicator lamp
  
• Thermal overload protection
  
• Single touch test button feature
  
• 3 different capacities 500 - 750 - 1100 gallons per hour

RM500 Specs:

• Connections: For 19mm (3/4") bore hose.
  
• Dimensions: 114mm high, 152mm long, 83mm wide.
  
• Fuse Size: 3 amp
  
• Output: Up to 31 litres/minute (7 gallons/minute). Max. recommended discharge head 2m.
  
• Fully automated bilge pump with integral float switch.
  
• Compact pump for smaller vessels.
  
• Tough plastic body.
  
• Quick release inlet strainer allows rapid cleaning.
  
• Low amp draw conserves batteries.
  
• Ignition protected.
  
• Packaged Dimensions: L:18.00 x H:9.00 x W:20.00cm
  
• Actual Weight: 0.46 Kg (Approx. 0.66 Kg packed)

RM750 Specs:

• Connections: For 19mm (3/4") bore hose.
  
• Dimensions: 114mm high, 152mm long, 83mm wide.
  
• Fuse Size: 5 amp
  
• Output: Up to 47 litres/minute (10 gallons/minute). Max. recommended discharge head 2m.
  
• Fully automated bilge pump with integral float switch.
  
• Compact pump for smaller vessels.
  
• Tough plastic body.
  
• Quick release inlet strainer allows rapid cleaning.
  
• Low amp draw conserves batteries.
  
• Ignition protected.
  
• Packaged Dimensions: L:18.00 x H:8.00 x W:20.00cm
  
• Actual Weight: 0.48 Kg (Approx. 0.68 Kg packed)

RM1100 Specs:

• Connections: For 28mm (1 1/8") bore hose.
  
• Dimensions: 114mm high, 152mm long, 83mm wide.
  
• Fuse Size: 5 amp
  
• Output: Up to 69 litres/minute (15 gallons/minute). Max. recommended discharge head 2m.
  
• Fully automated bilge pump with integral solid state switch.
  
• Compact pump for smaller vessels.
  
• Tough plastic body.
  
• Quick release inlet strainer allows rapid cleaning.
  
• Low amp draw conserves batteries.
  
• No power drain until the pump starts
  
• Ignition protected.
  
• Packaged Dimensions: L:18.00 x H:8.00 x W:20.00cm
  
• Actual Weight: 0.48 Kg (Approx. 0.68 Kg packed)

Rule Automatic Submersible Bilge Pumps
PUBR500	Rule 500GPH Auto Bilge	$119.99
PUBR750	Rule 750GPH Auto Bilge	$149.99
PUBR1100	Rule 1100GHP Auto Bge	$189.99

Float Switches

Rule Standard Float Switch

Rule automatic float switches are the world's largest selling float switches. They are designed to automatically activate your Non-Automatic bilge pump when water is present. They are simple. non-mercury, environmentally responsible switches. All are ignition protected, ultrasonically welded and sealed to give reliable, trouble-free service. The wiring is blocked to keep out moisture and exits the top of the switch to keep them high and dry. No battery drain and no exposed metal to corrode.

This non-mercury float switch has set the standard for the industry for years. Its new improved blocked wiring for greater durability and water resistance has again raised the standard. Removeable snap-on base for easy fitting, servicing and cleaning. It is suitable for pumps of any voltage up to a maximum pump draw of 14 amps. It suits all Rule non-automatic pumps except the 3700 & 4000GPH 12v pumps. 2 Year limited warranty.

• Dimensions: 105mm long, 40mm wide, 110mm high (at max. lift)
  
• Maximum Current: 14 amp
  
• For automatic on/off bilge pump control.
  
• Switch design prevents rapid on/off cycling.
  
• Optional cover available.
  
• Mercury Free
  
• Packaged Dimensions: L:14.00 x H:11.00 x W:14.00cm
  
• Actual Weight: 0.10 Kg (Approx. 0.30 Kg packed)

Rule Standard Float Switch
RFS	Rule Float Switch 12V	$64.00

Rule Plus Float Switch

Rule automatic float switches are the world's largest selling float switches. They are designed to automatically activate your Non-Automatic bilge pump when water is present. They are simple. non-mercury, environmentally responsible switches. All are ignition protected, ultrasonically welded and sealed to give reliable, trouble-free service. The wiring is blocked to keep out moisture and exits the top of the switch to keep them high and dry. No battery drain and no exposed metal to corrode.

The Rule-A-Matic "PLUS" is a compact , sleek, superior quality automatic float switch. It has a strong, fully integrated impact resistant cover which protects against debris and jamming of the switch. 14 gauge highly abrasion resistant wires exit the top of the switch - to keep them out of the water and keep wear and tear to a minimum. Built-in manual testing feature allows operational check.

• Dimensions: 120mm long, 60mm wide, 90mm high.
  
• Maximum Current: 20 amp
  
• For automatic on/off bilge pump control.
  
• Fully integrated, impact resistant cover.
  
• High abrasion resistant wire.
  
• Manual test feature.
  
• Also available with fuse holder - see below
  
• Mercury Free
  
• Packaged Dimensions: L:24.00 x H:16.00 x W:16.00cm
  
• Actual Weight: 0.24 Kg (Approx. 0.44 Kg packed)

Rule Plus Float Switch
042237095633

Float Switch

VERTICAL OR HORIZONTAL MOUNT NO or NC
Ideal for use in conjunction with solenoid valves, water pumps, etc., this float switch can be made NO or NC (Normally Open or Normally Closed) by the orientation of the float. Horizontally mounted so the float falls, when the fluid level rises it will switch ON at maximum float height. Mounting the switch so the float rises upwards when the fluid level rises above switch height it will switch OFF.
Vertical mounting, with the float down, will switch OFF at a high fluid level.
Widely used in marine, automobile, industrial, agricultural fluid level sensing applications.

• 560mm wire leads
  
• 92.5Lx 18D(mm) x M16
  
• Float Rise height: 40mm from centreline

 

Float Switch
SWFLOAT		$20.00

12VDC 8A Dimmer / Motor Speed Controller

DC speed controllers are ideal for slowing down pumps and motors or dimming lights but commonly use resistance circuits and are very inefficient.

The pulse width modulation (PWM) used in this controller allows you to vary the output from 0 to 100% while maintaining a very high efficiency.

When used on motors this ensures full torque is available at very low speed and the motor won't shudder at start-up.

Operates on any 12VDC system and capable of controlling devices rated at up to 8 amps.

The internal circuitry is fully potted and the control potentiometer is splash proof making this suitable for marine environments and other harsh conditions.

Dimmer / Motor Speed Controller
MP3209	8A 12VDC dimmer	$39.99

Water Level Indicator

The R/V. Electronics Water Level Indicator has been designed for easy Installation. The sensors are installed in the side of the water tank, therefore it is not necessary to remove the water tank from its mountings, however some care should be taken when choosing the position and fitting of the top guage unit. Choose a position to place the water guage where it is possible to feed the wiring loom up through the wall cavity or cupboard to guage. The wire loom lenght is 7.5m long, so the distance between where the gauge is to be fitted and the sensors must be less than 7.5m.

• Easy installation
• Batteries included
• Fits existing water tanks
• No removal of tank required
• Complete with all hardware
• Suitable for boats, caravans and camper trailers
• Automatically sets high and low levels

Australian Made.

Water Level Indicator
WTRVM	W/Lvl Ind Sq DMetal Tank	$59.99

 

Flat Drinking Hose Reel w/Cassette

A space saving, drain-easy universal reinforced leisure hose which is a popular choice for the caravan and marine industry for the conveyance of water. Marine SuperFlat features quality Braidlok technology and is supplied with deluxe quick-release fittings and an easy to handle dispensary wheel.

• Compact for convenient space-saving storage.
  
• Highly Flexible.
  
• Lightweight and User-friendly.
  
• Easily drained.
  
• Compatible with most leading brand garden fittings.
  
• Silicone-Free.
  
• Made from Cadmium-Free Materials
  
• Supplied with Deluxe Quick-release fittings - Universal Tap Connector and Adjustabe Spray Nozzle.
  
• Safety factor 3:1.
  
• Manufactured from FDA approved / Low toxic PVC raw materials.
  

Applications:

This hose comes in a 20m roll with cassette and can be used for filling water tanks for showering / cleaning purposes for caravans / marine. It can also be used for Wash down purposes for the caravan and marine industry and is also suitable for domestic garden use.

• Internal Diameter: 12mm
  
• External Diameter: N/A
  
• Length Tolerance: (1%)
  
• Maximum Working Pressure: 8.5 Bar
  
• Minimum Burst Pressure: 25 BAR
  
• Bend Radius: N/A
  
• Working Temperature: -15°C to +60°C
  
• Material: PVC
  
• Material Softness: N/A
  
• Flammability: N/A
  
• Weight per Meter: 88.5g
  
• Applicable Standards: FDA Compliant

 

Flat Hose Reel
HOSEFC	Flat hose with Cassette	$79.00

 

Night 'N' Day Liquid Soap, Shampoo & Conditioner

Night & Day All Over Body Liquid Soap. An excellent shower and bath soap that is very effective in preventing skin irritations and itch, dermatitis and other skin conditions. With its ability to lather in all water conditions, this makes it a must for all travellers.

Available in 250ml pump packs, or 1ltr containers.

 

Night & Day Shampoo for salt or brackish water is an extremely high quality shampoo suitable for all hair types in all water conditions - fresh or sea water. With balanced PH it will assist in preventing dandruff and itchy scalp.

Available in 250ml pump packs or 1ltr containers.

 

Night and Day hair condirioner is designed to leave your hair soft and easy to manage. Use in conjunction with Night and Day shampoo or any other shampoo. Effective in salt or brackish water it is an extremely high quality conditioner.

Available in 500ml pump packs only.

Night 'N' Day Liquid Soap
2674651040746
Night	& Day 1L Liquid Soap	$34.99
Night 'N' Day Liquid Shampoo
Night	& Day 250ml Shampoo	$12.99
2674651040975
Night 'N' Day Liquid Conditioner
Night	& Day 500ml Conditi DISC	$17.99