Low Voltage DC Plugs & Sockets
A DC connector (or DC plug, for one common type of connector) is an electrical connector for supplying direct current (DC) power.
Compared to domestic AC power plugs and sockets, DC connectors have many more standard types that are not interchangeable. The dimensions and arrangement of DC connectors can be chosen to prevent accidental interconnection of incompatible sources and loads. Types vary from small coaxial connectors used to power portable electronic devices from AC adapters, to connectors used for automotive accessories and for battery packs in portable equipment.
Cigarette Plugs
Blue Sea 12 Volt Marine Cigarette Plug
Moisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet
- "ON" indicating LED
- Strain relief
- Built-in 10 Amp fuse
- Designed to withstand the rigors of wet environments and constant vibration
- Large contact surfaces for good electrical connection
- Twist lock system—plug locks securely into socket
- Internal strain relief and cord seal
- Nickel plated copper alloy used for all current carrying components
- Front panel, rear panel, or surface mount
Specifications:
Maximum Voltage 12V DC
Weight 0.08lb (0.04 kg)
| BSS1010 Blue Sea 12 Volt Marine Cigarette Plug | |||
| BSS1010 | 12 Volt Marine CigPlug | $17.99 |  |
Blue Sea 12 Volt Plug with Double Extension Socket
Plug has a moisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet
- Plug features an"ON" indicating LED, moisture proof sealing ring, strain relief, and a built-in 10 Amp fuse
- Socket features a watertight cap, easy installation and interlocks with the plug
- Heavy duty 18 gauge wire
- Cord reaches up to 6 feet
- Designed to withstand the rigor's of wet environments and constant vibration
- Large contact surfaces for good electrical connection
- Twist lock system—plug locks securely into socket
- Internal strain relief and cord seal
- Nickel plated copper alloy used for all current carrying components
- Front panel, rear panel, or surface mount
Maximum Voltage: 12V DC
Weight: 0.50lb (0.23 kg)
| BSS1013 12 Volt Plug with Double Extension Socket - Packaged | |||
| BSS1013 | Cig Socket - Twin Exts | $45.99 | |
| BSS1013 12 Volt Plug with Double Extension Socket - Bulk | |||
| BSS1013B | Single plug w/dual s | $39.99 | |
Blue Sea 12 Volt Plug with Dash Socket
Plug has a moisture proof sealing ring around the shaft to keep out spray and make it seat firmly in the outlet
- Plug features an"ON" indicating LED, moisture proof sealing ring, strain relief, and a built-in 10 Amp fuse
- Socket features a watertight cap, easy installation and interlocks with the plug
- Designed to withstand the rigors of wet environments and constant vibration
- Large contact surfaces for good electrical connection
- Twist lock system—plug locks securely into socket
- Internal strain relief and cord seal
- Nickel plated copper alloy used for all current carrying components
- Front panel, rear panel, or surface mount
Specifications:
- Maximum Voltage 12V DC
- Weight 0.15lb (0.07 kg)
| BSS1015 Blue Sea 12 Volt Plug with Dash Socket | |||
| BSS1015 | 12v Plug w /Dash Sock | $30.99 | |
Bakelite Cigarette Lighter Plug
Cigarette Plug & Fuseholder
Features:
- Replaceable AGC/JMC Fuses
- Heat-resistant Bakelite body
- Designed for Size A (φ21.0mm) Sockets
- Amp Rating:
- Standard Model: 5A
- Standard Model: 5A
| Bakelite Cigarette Lighter Plug | |||
| CIGF | Cig Plug w/Fuse Holder | $4.99 | |
*Fuses sold separately
Narva 81039BL Twin USB Power Adaptor
A compact USB adaptor plug ideal for running items powerd by USB ports such as MP3 players, cameras, PDA's, GPS etc.
Plugs straight into existing Cigarette socket to provide USB charging outlets.
Features fuse protection and L.E.D power indicator.
Suitable for use with 12V or 24V vehicles and power supplies
Output 5V, 2A (1A per socket)
| Narva 81039BL Twin USB Power Adaptor | |||
| NAR81039BL | Twin USB Insert | $21.99 | |
Narva 81054BL Twin USB Power Adaptor Kit
An all-in-one kit ideal for powering modern electronic devices including tablets, PDAs, smart phones, GPS etc.
Features a 75cm retractable adaptor lead for tangle free storage and 3 interchangeable tips including Micro USB, Apple® and Nokia® 2mm connectors.
Suitable for use with 12V or 24V vehicles and power supplies.
Output 5V, 2.5A
| Narva 81054BL Twin USB Power Adaptor Kit | |||
| NAR81054BL | TWIN USB PWR KIT | $17.99 | |
Narva 81012BL Cigarette Lighter Plug with Off/On Rocker Switch and L.E.D Indicator and Spiral Lead
Features fuse protection, spiral lead that extends to 3 metres and an adaptor for European vehicles
Amperage rating 8A at 12V
- On/Off Rocker Switch
- LED Power Indicator
- 3m Spiral Lead
- Fuse Protection
| Narva 81011BL Cigarette Lighter Plug Lead | |||
| NAR81012BL | Spiral Cig w/switch | $29.99 | |
Narva 81018BL Cigarette Lighter Plug with L.E.D Indicator and Spiral Lead
Features unique pistol grip design, fuse protection, spiral lead that extends to 3.5 metres and an adaptor for European vehicles
Amperage rating 10A at 12V
- Ergonomic Pistol Grip
- LED Power Indicator
- 3.5m Spiral Lead
- Fuse Protection
| Narva 81018BL Cigarette Lighter Plug Spiral Lead | |||
| NAR81018BL | Spiral cig lead | $27.99 | |
Narva 81052BL Cigarette Lighter Plug with Extended Lead Accessory Sockets and USB Sockets
Features fuse protection, illuminated accessory sockets, dual USB ports and a 1m lead.
The USB ports are commonly used for electronic items such as smart phones, Tablets and GPS devices.
Amp rating: 10A at 12V, 5A at 24V
USB Output 5V, 5A (2.5A per port)
| Narva 81052BL Cigarette Lighter Plug with Extended Lead | |||
| NAR81052BL | Twin Cig & USB Flat | $34.99 | |
Narva 82109BL Thermoplastic Engel Type Plug
Unique design having an internal thread allowing the matching plug to be screwed in so that no matter how rough the conditions land or sea, your device remains connected.
The fitting mechanism allows installation into interior or exterior panels including steel and aluminium.
Amperage rating 15A at 12V, 7.5A at 24V
Suits ALL Dometic, Waeco and Engel 12/24VDC fridge leads
| Narva 82109BL Thermoplastic Engel Type Plug | |||
| NAR82109BL | Engel plug | $17.99 | |
Anderson Plugs
Invented by Anderson Power Products®, the innovative SB® connectors provide cost-effective reliability, design flexibility and mistake-proof capability for your products' manufacture, installation and maintenance. APP's 2 & 3 pole connectors are available for 50, 120, 175 and 350 amp ratings for use to 600 Volts continuous AC or DC operation.
There are SB®connectors for many applications and wire sizes, #16 (1.3 mm²) to 300mcm (152.0 mm²).
Mechanical keys ensure connectors will only mate with connectors of the same color.
Different color housings are selected to identify voltages, thus preventing mismatching of the power supply system.
The housings are interchangeable and genderless interconnects.
Insert contacts into housings and plug together for a clever, simple and low-cost solution to power interconnection.
Low-detent contacts are also offered for low insertion/withdrawal force applications.
Contacts are available in reeled and loose piece designs to support all production needs from very high volumes to engineering prototype and low-volume customized products.
*BEWARE OF CHEAP KNOCK OFFS*
Genuine Anderson Connectors contacts are made with Silver plating for superior Electrical Resistance. Beware of non genuine Anderson Contacts that are usualy made from cheap Tin.
30A Anderson Connectors
These industry standard connectors are used in automotive, marine, aviation and mining applications and are used widely in industry. They are genderless which means that there is no separate plug and socket and can be easily stacked to make custom configurations. UL rated to 30A DC, they are compact enough to fit in tight places but rugged enough to handle most current loads.
Supplied as a red and black pair with contacts.
Specifications:
- Contact Rating: 30A
- Voltage: 600V (AC or DC)
- Contact Wire Size: 2.1mm2- 5.3mm2 (#10-#14 AWG)
- Max Wire Insulation Diameter: 4.4mm
- Contact Retention Force: 9kgs (20lbs)
- Operating Temperature: -20 to +105ºC
| 30A Anderson Connectors | |||
| CONH30 | Aux Anderson 30A | $7.99 | |
50A Anderson Connectors - Grey
Common uses for the SB50 series include caravan, camping, solar and 4x4 applications.
50 Amp Anderson plug kits are available in grey, red, blue and black.
Thse are Colour Matching so Blue will not connect to Red or Grey and vice versa.
Grey and Black are interchangeable
Blue will only plug into Blue
Red will only plug into Red
- Contact Rating: 50A
- Contact Wire Size: #6 AWG / #8 AWG / #12-10 AWG
- Voltage Rating: 600V (AC or DC)
- Max Wire Insulation Diameter: 11mm
- Contact Retention Force: 50lbs
- Operating Temperature: -20 to +120 degrees C
| 50A Anderson Connectors - Grey | |||
| CONH5010-12 | 50A GREY 10-12G | $15.50 | |
| CONH508 | 50A GREY 8G | $15.50 | |
| CONH506 | 50A GREY 6G | $15.50 | |
*These are sold individually. If you require a pair (male and female) you need to order 2
50A Anderson Connectors - Black
Common uses for the SB50 series include caravan, camping, solar and 4x4 applications.
50 Amp Anderson plug kits are available in grey, red, blue and black.
Thse are Colour Matching so Blue will not connect to Red or Grey and vice versa.
Grey and Black are interchangeable
Blue will only plug into Blue
Red will only plug into Red
- Contact Rating: 50A
- Contact Wire Size: #6 AWG / #8 AWG / #12-10 AWG
- Voltage Rating: 600V (AC or DC)
- Max Wire Insulation Diameter: 11mm
- Contact Retention Force: 50lbs
- Operating Temperature: -20 to +120 degrees C
| 50A Anderson Connectors - Black | |||
| CONH50B10-12 | 50A BLK 10-12G | $15.50 | |
| CONH50B8 | 50A BLACK 8G | $15.50 | |
| CONH50B6 | 50A BLACK 6G | $15.50 | |
*These are sold individually. If you require a pair (male and female) you need to order 2
50A Anderson Connectors - Blue
Common uses for the SB50 series include caravan, camping, solar and 4x4 applications.
50 Amp Anderson plug kits are available in grey, red, blue and black.
Thse are Colour Matching so Blue will not connect to Red or Grey and vice versa.
Grey and Black are interchangeable
Blue will only plug into Blue
Red will only plug into Red
- Contact Rating: 50A
- Contact Wire Size: #6 AWG / #8 AWG / #12-10 AWG
- Voltage Rating: 600V (AC or DC)
- Max Wire Insulation Diameter: 11mm
- Contact Retention Force: 50lbs
- Operating Temperature: -20 to +120 degrees C
| 50A Anderson Connectors - Blue | |||
| CONH50BL10-12 | 50A BLUE 10-12G | $15.50 | |
| CONH50BL8 | 50A BLUE 8G | $15.50 | |
| CONH50BL6 | 50A BLUE 6G | $15.50 | |
*These are sold individually. If you require a pair (male and female) you need to order 2
50A Anderson Connectors - Red
Common uses for the SB50 series include caravan, camping, solar and 4x4 applications.
50 Amp Anderson plug kits are available in grey, red, blue and black.
Thse are Colour Matching so Blue will not connect to Red or Grey and vice versa.
Grey and Black are interchangeable
Blue will only plug into Blue
Red will only plug into Red
- Contact Rating: 50A
- Contact Wire Size: #6 AWG / #8 AWG / #12-10 AWG
- Voltage Rating: 600V (AC or DC)
- Max Wire Insulation Diameter: 11mm
- Contact Retention Force: 50lbs
- Operating Temperature: -20 to +120 degrees C
| 50A Anderson Connectors - Blue | |||
| CONH50R10-12 | 50A RED 10-12G | $15.50 | |
| CONH50R8 | 50A RED 8G | $15.50 | |
| CONH50R6 | 50A RED 6G | $15.50 | |
*These are sold individually. If you require a pair (male and female) you need to order 2
120A Anderson Connectors
Used widely in both domestic and industry, you'll find this connector in many 4WD applications, boating, automotive and other industries.
Supplied individually with a pair of contacts.
Available in Grey only.
- Contact Rating: 120A
- Contact Wire Size: #2 AWG
- Voltage Rating: 600V (AC or DC)
- Max Wire Insulation Diameter: 14.6mm
- Contact Retention Force: 45.5kg (100lbs)
- Operating Temperature: -20 to +125 degrees C
| 120A Anderson Connectors | |||
| CONH120 | Anderson Connector 120 | $18.99 | |
*These are sold individually. If you require a pair (male and female) you need to order 2
175A Anderson Connectors
Used widely in both domestic and industry, you'll find this connector in many 4WD applications, boating, automotive and other industries.
Supplied individually with a pair of contacts.
Available in Grey only.
- Contact Rating: 175A
- Contact Wire Size: #1 AWG
- Voltage Rating: 600V (AC or DC)
- Max Wire Insulation Diameter: 19mm
- Contact Retention Force: 137kg (300lbs)
- Operating Temperature: -20 to +125 degrees C
| 175A Anderson Connectors | |||
| CONH175 | 175A Anderson Conn 1/0 | $25.99 | |
*These are sold individually. If you require a pair (male and female) you need to order 2
350A Anderson Connectors
Used widely in both domestic and industry, you'll find this connector in many 4WD applications, boating, automotive and other industries.
Supplied individually with a pair of contacts.
Available in Grey only.
- Contact Rating: 350A
- Contact Wire Size: 7.35mm (#1 AWG)
- Voltage Rating: 600V (AC or DC)
- Max Wire Insulation Diameter: 27.9mm
- Contact Retention Force: 227kg (500lbs)
- Operating Temperature: -20 to +105 degrees C
| 350A Anderson Connectors | |||
| CONH350 | 350A Anderson Conn 2/0 | $39.99 | |
*These are sold individually. If you require a pair (male and female) you need to order 2
Anderson SB Silver Plated Wire Contacts
Use two silver plated contacts per housing for the best electrical performance.
Silver plated contacts offer superior electrical performance and durability up to 10,000 mating cycles. See redushing bushings in accessory section for smaller wires.
SB50 Contact Sizes
- #10-12 AWG (3.3 to 5.3 mm2)
- #8 AWG (8.4 mm2)
- #6 AWG (13.3 mm2)
SB120 Contact Sizes
- #2 AWG (33.6 mm2)
SB175 Contact Sizes
- #1/0 AWG (53.5 mm2)
SB350 Contact Sizes
- #4/0 AWG (107.2 mm2)
| Anderson Connector Contacts | |||
| CONHC10-12 | 1x Contact only | $3.50 | |
| CONHC8 | 1x Contact 8ga only | $3.50 | |
| CONHC6 | x 1 Contact 6ga only | $3.50 | |
| CONHC120 | 120A contact Each 2aw | $5.50 | |
| CONHC175 | 1 x 175A contact only | $6.50 | |
| CONHC350 | 1 x 350a contact only | $9.50 | |
*These are sold individually. If you require a pair (male and female) you need to order 2
Enerdrive 50A Anderson Plug Plates
EA-APH-01 Panel Mount 50A Anderson Plug Holder
Enerdrive has designed a new range of 50A Anderson plug plates for simple installation.
Choose from 3 different versions to suit your application.
Available with single or double socket holes for installing extra charge ports or adding a meter.
EA-APH-01 Panel Mount 50A Anderson Plug Holder
Dimensions: 59.70 x 42.25 x 41mm
| Enerdrive EA-APH-01 Panel Mount 50A Anderson Plug Holder | |||
| CONHPLATE1 | Panel Mount | $9.99 | |
EA-APH-02 Panel Mount 50A Anderson Plug Holder and 1 Socket Hole
Enerdrive has designed a new range of 50A Anderson plug plates for simple installation.
Choose from 3 different versions to suit your application.
Available with single or double socket holes for installing extra charge ports or adding a meter.
EA-APH-01 Panel Mount 50A Anderson Plug Holder
Dimensions: 59.70 x 75 x 41mm
| Enerdrive EA-APH-02 Panel Mount 50A Anderson Plug Holder & Socket | |||
| CONHPLATE2 | Panel Mount | $16.99 | |
EA-APH-03 Panel Mount 50A Anderson Plug Holder and 2 Socket Holes
Enerdrive has designed a new range of 50A Anderson plug plates for simple installation.
Choose from 3 different versions to suit your application.
Available with single or double socket holes for installing extra charge ports or adding a meter.
EA-APH-01 Panel Mount 50A Anderson Plug Holder
Dimensions: 149 x 42 x 41mm
| Enerdrive EA-APH-03 Panel Mount 50A Anderson Plug Holder & Sockets | |||
| CONHPLATE3 | Panel Mount | $18.99 | |
Dust/Water Resistant Rubber Cover to Suit Anderson Connectors
This is a great addition to all SB connectors in your electrical system.
Keeps the insides nice and clean and also ensures nothing will short any live connections.
Highly recommended for all installations.
This dust cover is designed to stop dirt and mud from getting inside the Anderson plug when it is not in use.
They fit over the outside of the plug as well as pushing inside, this creates a much more waterproof and dust proof protection for the entire plug and the electrical connections inside.
| CONH50C | 50A Anderson Cover Blk | $7.50 | |
| CONH175C | 175A Conn Black Cover | $9.99 | |
Handles for Anderson Connectors
This is a very good addition to your cable.
It minimises the chance of damaging cables by providing an easily accessible and safe method of disconnection.
Much better than pulling on the cables.
Facilitates easy connection/disconnection.
Ensures a secure grip, even with gloved hands for easier charging of electric forklifts etc.
| CONH50H | 50A Anderson Handle | $4.99 | |
| CONH175H | 175A Handle | $17.00 | |
Weather Proof Anderson Cover
The intelligent design of the covers ensures that mating power connectors
are locked in place by a unique locking tab system to secure a safe and reliable
connection for towing, battery charging, marine and industrial OEM applications.
Suits SB50 and SB175 Connectors
- Manufactured from heavy duty materials the covers protect the power connector from the elements
- Compatible most power connector brands
- Unique locking tab system secures mating connections
- Snap fit of power plug connector into the cover
- Retractable access cover
- Heavy duty PA nylon construction
- Multiple mounting points for adjustment
- Rear entry cable seal
- Stainless steel hardware
- Supplied with mating locking connector tab
| TV-201426 |  |
||
| CONH175C | 175A Anderson Cver As | $39.99 | |
Weather Proof Anderson Boot Load / Source
These soft shell boots provide water, dirt, chemical and UV protection for the high current Anderson connectors.
The durable boots shield the connectors from water and dirt to IP64 when connected or by itself when the integral cover is used.
The terminals of the rubber boot can also be customised to fit cables in-between 12-6 AWG (4-16mm²) wires.
Features:
- IP64 protection
- Resistant to UV, Roadway Chemical and Ozone
- Splash resistant when connected and by itself when the integral cover is used
- Customise boot terminals to fit your cables from 12-6 AWG which is 4-16mm²
| 9319236486566 | |
||
| 9319236486573 | |
DIN / Merit Plugs
Universal Plug with screwed strain relief - Non Fused
8 and 16 A 12-24 V
Fitting for cigarette lighter and DIN / Merit sockets.
Screw terminals for cables up to 2.5 mm2
Adaptor that can be firmly positioned by a bayonet catch, swing-out puller tool.
| Non Fused Universal Plugs | |||
| PAPU8 | 8A Universal Not Fused | $12.99 | |
| PAPU16A | 16A Universal No Fuse | $12.99 | |
Safety Universal Plug with screwed strain relief - Fused
Integrated & interchangeable fuse from 1-16 A
12-24 V fitting for cigarette lighter and DIN / Merit sockets.
Screw terminals for cables up to 2.5 mm2.
Adaptor that can be firmly positioned by a bayonet catch, swing-out puller tool.
| Fused Universal Plugs | |||
| PAPUF8 | ARRID 8A Fused Uni | $13.99 | |
| PAPUF16 | ARRID 16A Fused Uni | $14.99 | |
Universal Plug with screwed strain relief and LED - Fused
8 and 16 A, 12-24 V.
Fitting for cigarette lighter and DIN / Merit sockets.
Screw terminals for cables up to 2.5 mm2.
Adaptor that can be firmly positioned by a bayonet catch, swing-out puller tool.
| Fused Universal Plug with LED | |||
| PAPF8LED | 8A Fused plug w/ LED | $15.99 | |
Bendable Safety Universal Plug
Bendable up to 180°.
Screw terminals with or without strain relief
Adaptor that can be firmly positioned by a bayonet catch, 12-24 V
Fitting for cigarette lighter and DIN / Merit sockets.
With integrated, interchangeable fuse from 1-8 A / 12-24 V.
| PAPB8A | 8A Bend Univ Fused | $14.99 | |
DIN / Merit Plug 8A
Soldering contacts and maze-like strain relief
For connecting any type of 8 A accessory 12-24V
Fitting for all standard sockets according to DIN EN ISO 4165.
| PAP8 | ARRID Std 8A Plug | $5.99 | |
DIN / Merit Plug 12A
With screw terminals and strain relief.
For connecting any type of 12 A accessory 12-24 V
Fitting for all standard socket outlets to DIN ISO 4165.
| PAP12 | ARRID Std 12A Plug Scrw | $11.99 | |
DIN / Merit Plug 15A
With screw terminals, for connecting any type of 15 A accessory, 12-24 V,
Easy to assemble, optimal contact
Fitting for all standard socket outlets to DIN ISO 4165.
| PAP15 | ARRID Std 15A Plug Scrw | $13.99 | |
Clipsal 492/32 Plug Top, Straight, 2 Polarised Pin, 15A, 32V
Flexible yet unbreakable, these plugs feature an internal cord anchor and external cord grip to keep cords firmly in place.
Terminal pin clamp screws are riveted and backed off ready for fast flexible cord connection.
An instant external visual check for correct connections is provided in the base of plug.
Key Features
- Suitable for 0.75 sq mm and 1 sq mm ordinary duty three core flexible cords
- 32V
- IEC-amperage: 15 A
- Connection system: Screwed terminal
- Cable entry: mm
- Angle of plug: Straight
- Material: Plastic
| 492/32TR | 2 Pin Polarised Plug | $18.50 | |
Deutsch® Connectors
Deutsch DT Connector Housing Kit
Deutsch DT Series connectors offer field proven reliability and rugged quality.
The DT design strengths include optional flange mounting, multi-pin arrangements, lower cost, and design flexibility.
The DT Series offers the designer the ability to use multiple size 16 contacts, each with 13 amp continuous capacity, within a single shell.
57422BL - 2 way Waterproof Connector with Terminals, Wedge and Seals - Amperage rating: 13A
57424BL - 4 way Waterproof Connector with Terminals, Wedge and Seals - Amperage rating: 13A
- Accepts contact size 16 (13 amps)
- 14-20 AWG
- 2, 3, 4, 6, 8, and 12 cavity arrangements
- In-line, flange, or PCB mount
- Rectangular, thermoplastic housing
- Integrated latch for mating
- Wedgelocks assure contact alignment and retention
- Grommet: Silicone rubber
- Insert Retainer: Thermoplastic
- Receptacle Interfacial Seal: Silicone rubber
- Shell: Thermoplastic
- Wedgelocks: Thermoplastic
| NAR57422 | Deutsch DT 2 way conn | $13.99 | |
| NAR57424 | Deutsch DT 4-Way Conn | $19.99 | |
Deutsch DTP Connector Housing Kit
Deutsch DTP Series connectors are the solution for your power application requirements.
Building on both the DT and DTM design strengths, the DTP connector line was developed to fill the need for higher amperage, multi-pin, inexpensive connectors.
The DTP Series offers the designer the ability to use multiple size 12 contacts, each with a 25 amp continuous capacity, within a single shell.
The DTP connectors are currently available in two and four pin configurations.
57314BL - 2 way Waterproof Connector with Terminals, Wedge and Seals - Amperage rating: 25A
57416BL - 4 way Waterproof Connector with Terminals, Wedge and Seals - Amperage rating: 25A
- Accepts contact size 16 (13 amps)
- 14-20 AWG
- 2 and 4 cavity arrangements
- In-line, flange, or PCB mount
- Rectangular, thermoplastic housing
- Integrated latch for mating
- Wedgelocks assure contact alignment and retention
- Grommet: Silicone rubber
- Insert Retainer: Thermoplastic
- Receptacle Interfacial Seal: Silicone rubber
- Shell: Thermoplastic
- Wedgelocks: Thermoplastic
| NAR57314 | DTP2 Deutsch DTP 2way | $28.99 | |
| NAR57316 | DTP2 Deutsch DTP 4way | $34.99 | |
SAE Connectors
Narva Water-Resistant Harness Connectors
These Water-Resistant harness connectors are ideal for applicatons where moisture and grime gather around electrical connections.
Features 270mm of cable per connector
Amperage rating: 16A
56292BL - 2 Way Harness Connector
56293BL - 3 Way Harness Connector
56294BL - 4 Way Harness Connector
56296BL - 6 Way Harness Connector
| NAR56292BL | SAE connector 2 pin | $9.99 | |
| NAR56293BL | SAE connector 3 pin | $11.99 | |
| NAR56294BL | SAE connector 4 pin | $14.99 | |
| NAR56296BL | SAE connector 6 Pin | $15.99 | |
AMP® Super Seal Connectors
The AMP® Super seal series of connectors have been designed to meet the severe performance requirements required within the automotive field.
The housings are made from a polyamide glass filled plastic (-40°C to + 125°C rated) with a silicone rubber seal making them resistant to fuels, motor and transmission ils, brake fluid, detergents, anti-freeze, coolants and so on.
They are watertight (IP67), offer sturdy and reliable contacts and a preassembled secondary lock ensures correct and complete insertion of the contact in the housing preventing it from slipping out of the connector.
57521BL - 1 way Waterproof Connector with Terminals and Seals Amperage rating: 14A
57522BL - 2 way Waterproof Connector with Terminals and Seals Amperage rating: 14A
| NAR57521BL | AMP W/P 1pole pair | $8.99 | |
| NAR57522BL | AMP W/P 2pole pair | $10.99 | |
Narva Quick Connect Connectors
Narvas quick connect housings feature quality lock tabs that click into place securely holding the male and female pieces from coming apart.
Available in convenient paired blister packs.
56271BL - 1 way Connector Housing with Terminals Amperage rating: 20A
56272BL - 2 way Connector Housing with Terminals Amperage rating: 20A
56273BL - 3 way Connector Housing with Terminals Amperage rating: 20A
56274BL - 4 way Connector Housing with Terminals Amperage rating: 20A
56278BL - 8 way Connector Housing with Terminals Amperage rating: 20A
| NAR56271BL | 1Way Connector M/FM | $5.99 | |
| NAR56272BL | 2 Way Connector M/F | $5.99 | |
| NAR56273BL | 3 Way Connector M/F | $6.99 | |
| NAR56274BL | 4Way Connector M/FM | $7.99 | |
| NAR56278BL | 8 Way Connector M/F | $9.99 | |